Removing the front-panel light board
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
computer
cover.
2. Remove the
front
bezel.
Procedure
1. Open the side-chassis.
a. side-chassis
2. Disconnect the lighting cable from the system board.
3. Remove the lighting cable from the routing guides on the chassis.
4. Slide the cable out through the side-chassis and close the side-chassis.
computer. After working inside your computer, follow the instructions in
Removing the front-panel light board
28
After
49