NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
computer
cover.
2. Remove the
front
bezel.
3. Remove the
wireless
card.
Procedure
1. Remove the antenna cables from the routing guides on the side-chassis.
2. Gently slide the antenna cables through the routing holes on the side-chassis.
a. antenna cables
b. routing guides
c. routing holes (2)
3. Close the side-chassis.
4. Using a plastic scribe, gently pry the antenna modules off the side-chassis.
40
Removing the antenna modules
Removing the antenna modules
computer. After working inside your computer, follow the instructions in
22
After