NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the notch on the wireless card with the tab on the wireless-card slot.
2. Slide the wireless card at an angle into the wireless-card slot.
3. Connect the antenna cables to the wireless card.
4. Slide the wireless-card bracket over the wireless card.
5. Replace the screw that secures the wireless card to the system board.
1. tab
3. wireless card
5. antenna cables
7. screw
6. Close the side-chassis.
Post-requisites
1. Replace the
front
bezel.
2. Replace the
computer
cover.
Replacing the wireless card
computer. After working inside your computer, follow the instructions in
2. notch
4. wireless-card slot
6. wireless-card bracket
Replacing the wireless card
21
After
39