Tools Required - Agilent Technologies 8960 Installation Note

Agilent Technologies 8960 Wireless Communication Test Set
MDC Upgrade for E5515B/C
Kit Part Number: E5515BU-506 and E5515CU-506
Products Affected: . . . . . . . . . . . . . . .
Serial Numbers: . . . . . . . . . . . . . . . . .
Options Required: . . . . . . . . . . . . . . .
Applications Supported: . . . . . . . . . .
To Be Performed By: . . . . . . . . . . . . .
Estimated Installation Time: . . . . . . .
Estimated Verification Time: . . . . . . .
Introduction
Installation includes the following major steps:
1. Disassembly
a. Remove the instrument covers.
b. Remove the old Measurement Down Converter.
2. Assembly
a. Install new Measurement Down Converter.
b. Install Option Label
3. .
Replace covers
Installation Kit Parts List
Item Qty
1 1
2 1
3 1
•
Label should have 506 printed on it.

Tools Required

• TORX T-15 and T-20 drivers
Safety Considerations
WARNING
Before you disassemble the test set, turn the power switch off and
unplug the power cord. Failure to unplug the test set can result in
personal injury.
CAUTION
Electrostatic discharge (ESD) can damage or destroy electronic
components. All work on electronic assemblies should be performed at a
static-safe workstation.
E5515B/C
All
N/A
All
(X) Agilent Technologies Service Center
(X) Personnel Qualified by Agilent Technologies
( ) Customer
0.5 hours
0.5 hours
Description
Label
Measurement Down Converter Module
Installation Instructions (this document)
3