Safety Notes; Installation Instructions; Symbol Description - Hans Grohe PuraVida 15275400 Instructions For Use/Assembly Instructions

Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The hot and cold supplies must be of equal pres-
sures.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• If the water is flowing along the fixture in the direction
of the shaft, the spray former must be replaced with a
standard air bubbler 95928000.
• The drain valve must only be used as intended. It is not
allowed to attach other objects to the drain valve, for
example a semi-pedestal.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temp.:
Thermal disinfection:
• Safety against backflow
• The product is exclusively designed for drinking water!
4
max. 1 MPa
0,25 - 0,5 MPa
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
max. 70°C
65°C
max. 70°C / 4 min
Assembly (see page 31)
English
Symbol description
Do not use silicone containing acetic acid!
Dimensions (see page 33)
Flow diagram (see page 33)


Spare parts (see page 35)
Operation (see page 34)
• Hansgrohe recommends not to use as
• Due to the design of the Bidette fittings,
Cleaning (see page 36)
Test certificate (see page 32)
Rate of flow mixer
Rate of flow handshower
drinking water the first half liter of water
drawn in the morning or after a pro-
longed period of non-use.
a small amount of water will leak at the
outlet of the fitting when the hand shower
is running.