Audio Page - Tascam DV-D6500 Owner's Manual

Menu item
SCREEN SAVER
You can select the screen saver
function ON or OFF.
See page 15 for details about
screen saver function.
MP3/JPEG
The unit can playback MP3 and
JPEG files recorded on a CD-R/CD-
RW disc, however, if a disc contains
both of MP3 and JPEG files, you can
only playback files of either type
selected by this menu item.

AUDIO page

AUDIO
DIGITAL AUDIO OUTPUT
STREAM/PCM
ANALOG DOWN MIX STEREO
D RANGE COMPRESSION
ON
SELECT
USE §¶˙¥ TO SELECT, USE ENTER TO CONFIRM
TO EXET, PRESS CHOICE.
ENTER
Menu item
DIGITAL AUDIO OUTPUT
To connect the unit's digital output to
an external device equipped with a
digital input, this item must be set
correctly.
See the table below for details
about the relation between the
setting and output signals.
Playback discs
DVD with 48/44.1 kHz, 16/20/24
bit linear PCM
DVD with 96/88.2 kHz, 16/22/24
bit linear PCM
DVD with DTS
DVD with Dolby Digital
DVD with MPEG Multichannel
Audio CD/Video CD/SVCD
Audio CD with DTS
CD-R/RW with MP3
Setting options
• ON
The current picture gets dark.
• OFF
The screen saver function is off.
• MP3
MP3 files can be played back if a
disc contains both of MP3 and JPEG
files.
• JPEG
JPEG files can be played back if a
disc contains both of MP3 and JPEG
files.
This page allows you to select desired options concerning with audio sound.
Setting options
• PCM ONLY
Should be selected when you
connect the DIGITAL OUT jack of
the unit to the linear PCM digital
input of other audio equipment.
• DOLBY DIGITAL/PCM
Should be selected when you
connect the digital input of a Dolby
Digital decoder or an amplifier with
a built-in Dolby Digital decoder.
When this option is selected,
playing back a disc recorded by the
DTS or MPEG Multichannel format
outputs a linear PCM digital signal.
• STREAM/PCM
Should be selected when you
connect the digital input of an
amplifier with a built-in DTS, MPEG
Multichannel or Dolby Digital
decoder, or the stand-alone unit of
such a decoder.
Digital output signal chart
PCM ONLY
48 kHz, 16 bit, stereo linear PCM
48 kHz, 16 bit, stereo linear PCM
48 kHz, 16 bit, stereo linear PCM
44.1 kHz, 16 bit, stereo linear PCM
• When a disc contains either MP3 or
JPEG files, the unit can play back the
files regardless of the setting.
• When playing a DVD VIDEO or
Audio CD disc with DTS, use a DTS
decoder to get correct signals from
your speakers.
• With some DVD VIDEO discs that are
not fully copy-protected, a 20 or 24
bit digital signal may be output.
• A signal with the 88.2 kHz or more
sampling frequency cannot be
output from the DIGITAL OUT jack,
regardless of the setting (due to the
copy protection issue).
Output
DOLBY DIGITAL/PCM
48/44.1 kHz,16 bit, stereo linear PCM
No output
Dolby Digital bitstream
44.1 kHz,16 bit, stereo linear PCM
Linear PCM
Changing the initial settings
Notes/examples
Notes/examples
STREAM/PCM
DTS bitstream
MPEG bitstream
DTS bitstream
English
50