Akai PDP4210EA1 Service Manual page 74

turn off power and wait indicator light is off. Turn on power and TV can work.
Checking
It is needed to check the version of the firmware for MT8202 which has been
download into the Plasma TV .
Press Menu button of the remote control，following input "8202"of the remote
control and OSD menu for Factory Setting is appeared on the screen .
Use the remote control and select the mode of Firmware Version and then enter the
mode of Firmware Version . It is easy to be found the version of the current firmware
for MT8202 is as the following : "Factory ID : PDP4210EA1_VXX "
Process of update MT5351AG
Preparing :
1．
Connect RS232 download
，while another side is connected to PC COM port.
TV
2. Store the MtkTool into the PC
Downloading :
3．
Turn on AC power switch of the Plasma TV and then press the button "standby" of the remote
control . The image could be found on the screen of the Plasma TV while the color of the
power indicator is green . (the mode of the Plasma TV will be standby mode if after turn on
the main power switch only . )
4．
Execute MTKtool and select the chipset as MT5351AG. (the software of MTKtool will be sent
to your side)
line, One connector is connected to RS232 connect port of Plasma