Install The Pa-800 Series Firewall In A Four-Post 19-Inch Equipment Rack - Palo Alto PA-800 Series Hardware Reference Manual

Install the PA-800 Series Firewall in a Four-
Post 19-inch Equipment Rack
The following procedure describes how to install the PA-800 Series firewall in a four-post equipment rack.
Before you begin, make sure you purchased the back brackets (PAN-PA-1RU-RACK4) to secure the firewall
to the back rack-posts.
Attach one rack-mount bracket to each side of the firewall in the front-mount position using
STEP 1 |
four #6-32 x 5/16" screws for each bracket and torque to 9 in-lbs.
STEP 2 | Attach one rack-mount rail to each side of the firewall using two #6-32 x 5/16" screws for
each rail and torque to 9 in-lbs.
STEP 3 | With help from another person, hold the firewall in the rack and secure the front rack-mount
brackets to the front rack-posts using two screws for each bracket. Use the appropriate screws
(#10-32 x 3/4" or #12-24 x 1/2") for your rack and torque to 25 in-lbs. Use cage nuts to secure
the screws if the rack has square holes.
STEP 4 | Slide one back rack-mount bracket into each of the two previously installed side rack-mount
rails and secure the brackets to the back rack-posts using the appropriate screws for your rack
(#10-32 x 3/4" or #12-24 x 1/2") and torque to 25 in-lbs.
22
PA-800 SERIES NEXT-GEN FIREWALL HARDWARE REFERENCE | Install the PA-800 Series Firewall
2019 Palo Alto Networks, Inc.
©