Interpret The Leds On A Pa-800 Series Firewall - Palo Alto PA-800 Series Hardware Reference Manual

Interpret the LEDs on a PA-800 Series Firewall

LED
Front Panel LEDs
PWR (Power)
FANS
ALARM
STATUS
HA (High-Availability)
TEMP (Temperature)
Ethernet port LEDs
SFP and SFP+ LEDs
PA-800 SERIES NEXT-GEN FIREWALL HARDWARE REFERENCE | Service the PA-800 Series Firewall Hardware
Description
Green—The firewall is powered on.
Off—The firewall is not powered on or an error has occurred with the
internal power system (for example, power is not within tolerance
levels).
Green—All cooling fans are operational.
Off—One or more fans failed.
Red—A hardware component failed, such as a power supply failure, a
firewall failure that caused an HA failover, a drive failure, or hardware
is overheating and the temperature is above the high temperature
threshold.
Off—The firewall is operating normally.
Green—The firewall is operating normally.
Yellow—The firewall is booting.
Green—The firewall is the active peer in an active/passive
configuration.
Yellow—The firewall is the passive peer in an active/passive
configuration.
Off—High availability (HA) is not operational on this firewall.
In an active/active configuration, the HA LED indicates
only HA status for the local firewall and has two
possible states (green or off); it does not indicate
HA connectivity of the peer. Green indicates that the
firewall is either active-primary or active-secondary and
off indicates that the firewall is in any other state (For
example, non-functional or suspended).
Green—The firewall temperature is normal.
Yellow—The firewall temperature is outside tolerance levels.
See PA-800 Series Environmental Specifications
range.
Left LED—Solid green indicates a network link.
Right LED—Blinking green indicates network activity.
These ports have one green LED:
for the temperature
31
2019 Palo Alto Networks, Inc.
©