Operating Mode - Ebyte E90-DTU User Manual

Chengdu Ebyte Electronic Technology Co,;Ltd

6. Operating Mode

E90-DTU (170L30) has four operating modes, if low power consumption is not required, normal communication is recommended to
configure the data transceiver for the normal mode (mode 0);
The factory default is normal mode (mode 0).
Categories
M ode 0 Normal M ode
M ode 1 Wake-up M ode
M ode 2 Power-saving M ode
M ode 3 Sleep M ode
★ Note: no need to care about the wake-up mode (mode 1) and power saving mode (mode 2) if it doesn't request low
power consumption.
Chengdu Ebyte Electronic Technology Co,;Ltd
Copyright ©2012–2019，
M1 M0
ON ON Open UART and RF，transparent transmission is on
ON OFF Air wake-up mode, the packet comes with a wake-up code,
The air wake-up receive mode, saving receive power, the mode
OFF ON
OFF OFF Parameter setting using the configuration software
E90-DTU (170L30) user manual
Description
cannot be transmitted
11