Dimensional Drawing; Tape Maintenance; Cleaning The Tape Path; Demagnetizing Heads - Tascam CC-222MKII Owner's Manual

7 – Reference and specifications—Dimensional drawing
General specifications
Voltage requirements
Power consumption
Applicable electromagnetic environment
Peak inrush current
Dimensions
Weight
Operating temperature
Supplied accessories

Dimensional drawing

Tape maintenance

The heads and tape path should be cleaned and
demagnetized periodically.

Cleaning the tape path

fluid to a cotton bud or soft cloth, and lightly rub the
heads, capstan and all metal parts in the tape path.
Also clean the pinch roller using rubber cleaning
fluid.
Both fluids are available in TEAC Tape Cleaning
Kits HC-2 and RC-2 in the U.S.A. or TZ-261 in other
areas.

Demagnetizing heads

off, then demagnetize the heads using a TEAC E-3
demagnetizer.
USA/Canada 120 VAC, 60 Hz
U.K./Europe 230 VAC, 50 Hz
Australia 240 VAC, 50 Hz
General export 120/230 VAC, 60 Hz
28 W
E4
1.1 A
483 x 138 x 295 (mm)
19 x 5.4 x 11.6 (in)
7.4 kg (16.3 lbs)
5°C to 35°C (41°F to 95°F)
RC-222 remote control unit
2 x AA batteries
Rack mounting kit
483 mm (19.0")
466 m (18.4")
435mm (17.1")
Apply head cleaning
Be sure that the power is
15 mm
(0.6")
For details of its use, read the instructions supplied
with the demagnetizer and make sure you understand
them thoroughly before attempting this operation.
Pinch Roller
Capstan
Erase Head
TASCAM CC-222MKII Owner's Manual
10 mm
270 mm (10.6") (0.4")
Record/Play Head
39