Tascam CC-222MKII Owner's Manual page 12

2 – Features and controls
1 23 4 5 6 7 8 9
This is not a comprehensive explanation of the mean-
ing and functions of all of the controls. These are
described more comprehensively in other parts of the
manual, but this section provides a brief reminder of
the functions provided by these controls.
1 Power switch (POWER)
and push again to turn the unit off.
2 Cassette holder
key. Insert cassettes tape side downwards,
EJECT
and close the holder by hand.
3 REW key
Starts the tape moving fast in the
right-to-left direction. If the tape is already in play
mode, it acts as a search key.
4 FFWD key
Starts the tape moving fast in the
left-to-right direction. If the tape is already in play
mode, it acts as a search key.
5 Tape STOP key
Stops the current tape
transport operation.
6 Tape PLAY key (
or recording from record pause, from right to left.
7 Tape PLAY key (
or recording from record pause, from left to right.
8 Tape PAUSE key
recording.
9 Tape RECORD key
tape record pause mode.
A Tape EJECT key
B Display
Provides information on the status of
the cassette and disc transport and the selected input
sources, etc.
C RESET key
Resets the tape counter to zero.
12
TASCAM CC-222MKII Owner's Manual
0 q w e r
i o
z x c
Push to turn on,
Open this holder using the
)
h Starts tape playback,
)
y
Starts tape playback,
Pauses tape playback or
Goes from tape stop to
Opens the cassette holder.
t y u
p a s d f g h j k l ;
v b n m , .
D RTZ key
Returns the tape to the zero position.
E INPUT 2 SEL key
key cycle between the different sources available for
the cassette recorder:
F DUB 1 TAPE
process of automatic recording from the cassette to a
recordable disc. See the section on recording to disc
for full details.
G INPUT 1 SEL key
key cycle between the different sources available for
the CD-RW drive:
, and
OPTICAL
H PHONO key
source to the cassette or disc recorder, depending on
the selection made in the menu system. See the
appropriate sections on recording to either tape or
disc.
I REC MUTE key
and this key is pressed, the sound is muted for about
four seconds, and the unit enters record pause mode.
J INPUT (cassette) control
control affects the level fed to the cassette. Note that
it has no effect during automatic disc-to-tape dubbing
if the menu item bypassing the volume during dub-
bing is set to "through".
K DUB 2 TAPE
process of automatic recording from the disc to tape.
See the section on recording to tape for full details.
L INPUT (CD) control
affects the level fed to the disc. Note that it has no
effect during automatic tape-to-disc dubbing if the
menu item bypassing the volume during dubbing is
set to "through".
/ !
Repeated presses of this
, and .
LINE2 DISC
> CD-RW key
Starts the
Repeated presses of this
, ,
LINE1 PHONO TAPE
COAXIAL
Starts recording from the phono
When recording to cassette
This rotary
< CD-RW key
Starts the
This rotary control
,