Dimensional Drawing; Tape Maintenance; Cleaning The Tape Path; Demagnetizing Heads - Tascam CC-222 Owner's Manual

7 – Reference and specifications—Dimensional drawing

Dimensional drawing

Tape maintenance

The heads and tape path should be cleaned and
demagnetized periodically.

Cleaning the tape path

fluid to a cotton bud or soft cloth, and lightly rub the
heads, capstan and all metal parts in the tape path.
Also clean the pinch roller using rubber cleaning
fluid.
Both fluids are available in TEAC Tape Cleaning
Kits HC-2 and RC-2 in the U.S.A. or TZ-261 in other
areas.

Demagnetizing heads

off, then demagnetize the heads using a TEAC E-3
demagnetizer.
483 mm (19.0")
466 m (18.4")
435mm (17.1")
Apply head cleaning
Be sure that the power is
15 mm
(0.6")
For details of its use, read the instructions supplied
with the demagnetizer and make sure you understand
them thoroughly before attempting this operation.
Pinch Roller
Capstan
Erase Head
TASCAM CC-222 Owner's Manual
10 m
270 mm (10.6") (0.4
Record/Play Head
41