General Safety Instructions; Directives And Declarations - Siemens SIMATIC IPC847D Product Information

Onboard SATA AHCI / RAID controller software for Windows 10 Enterprise 2016 LTSB
Windows operating systems as of Windows 10 Enterprise 2016 LTSB require the new RAID controller software as of version
RST V15.
Install the following RAID controller software from the "Documentation and Drivers" DVD supplied in line with the required
operating mode:
● SATA RAID operation: RST version PV15.8.x.xxxx
● SATA AHCI operation: RST version PV14.x.x.xxxx
RST PV15.8.0.1006 or later version
1
RST PV14.8.6.1018 or later version
2

General safety instructions

Update of section 2.1 in the operating instructions on the topic of industrial security.
Security information
Siemens provides products and solutions with industrial security functions that support the secure operation of plants,
systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and
continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens' products and solutions only form one
element of such a concept.
Customer is responsible to prevent unauthorized access to its plants, systems, machines and networks. Systems, machines
and components should only be connected to the enterprise network or the internet if and to the extent necessary and with
appropriate security measures (e.g. use of firewalls and network segmentation) in place.
Additionally, Siemens' guidance on appropriate security measures should be taken into account. You can find more
information about Industrial Security at (http://www.siemens.com/industrialsecurity).
Siemens' products and solutions undergo continuous development to make them more secure. Siemens strongly
recommends to apply product updates as soon as available and to always use the latest product versions. Use of product
versions that are no longer supported, and failure to apply latest updates may increase customer's exposure to cyber
threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed at
(https://support.industry.siemens.com).

Directives and declarations

Supplement to sections 8.2.1 and 8.2.2 of the operating instructions.
Electromagnetic compatibility
This product meets the requirements of EU Directive 2014/30/EU "Electromagnetic Compatibility".
Low-voltage directive
The device with AC power supply complies with the requirements of the EU Directive 2014/35/EU "Low Voltage Directive".
Compliance with this standard has been verified according to EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 +
AC:2011 + A2:2013.
18
1
2
SIMATIC IPC847D
A5E38018732-AD, 09/2017