Installing The Multipurpose Blade, Dough Blade, Or Egg Whip - KitchenAid 5KZFP11 Manual

ASSEMBLING THE FOOD PROCESSOR ACCESSORY KIT
Multipurpose blade, dough blade or egg whip
IMPORTANT: The multipurpose blade, dough blade and egg whip are included with the Cook
Processor (sold separately) and may be used with the Food Processor Accessory Kit.
Place the blade on the power shaft.
1
Rotate the blade so it falls into place on
the power shaft.
Install the work bowl cover, being sure
3
it locks into place.
Attaching the work bowl cover
Place the work bowl cover on the
1
work bowl, aligning the arrow with
the unlock symbol. Rotate the cover
counterclockwise until it locks into place.
NOTE: Your Food Processor Accessory Kit will not operate unless the work bowl and
work bowl cover are properly locked on the base. If the lid is not properly installed, LID
OPEN will appear in the display.
12
W10832406A_Australia_v2.indd 12
Push to lock: Press down firmly on the
2
multipurpose blade until it is down as
far as it will go.
Fit the food pusher into the 2-in-1
2
feed tube. See "Using the 2-in-1 Feed
Tube" for details on working with
different sized foods.
US
5/3/16 11:18 AM