Table of Contents
Advertisement
TROUBLESHOOTING
If your Food Processor Accessory Kit should malfunction or fail to operate, check
the following:
• Display shows UNLOCKED:
Bowl is not locked into the base correctly.
Check the bowl to be sure it is locked into
place.
• Display shows LID OPEN:
Lid is not locked in place.
Food Processor Accessory Kit doesn't
run:
• Make sure that the bowl is fully seated
on the Cook Processor base and the lid is
properly aligned and locked in place
• Be sure the large food pusher is inserted
in the feed tube.
• When using the large feed tube opening,
make sure that food is not above the Max.
Fill line on the feed tube.
• Have you selected a speed?
• Is the Cook Processor plugged in?
• Is the fuse in the circuit to the Cook
Processor in working order? If you have
a circuit breaker box, be sure the circuit
is closed.
• Unplug the Cook Processor, then plug it
back into the outlet.
• If the Cook Processor is not at room
temperature, wait until it reaches room
temperature and retry.
For information on warranty, please visit kitchenaid.com.au
18
W10832406A_Australia_v2.indd 18
Food Processor Accessory Kit not
shredding or slicing properly:
• Make sure the raised-blade side of the
disc is positioned face up on the common
adapter.
• If using the adjustable slicing blade, make
sure it is set to the correct thickness.
• Make sure ingredients are suitable for
slicing or shredding.
If the work bowl cover won't close
when using the disc:
• Make sure the disc is installed correctly,
with the raised nub on top, and is
positioned properly on the drive adapter.
If the problem is not due to one of the
above items, see the "Warranty and
Service" section.
or kitchenaid.co.nz
5/3/16 11:18 AM
Advertisement
Table of Contents
