Changing The Fuse In The Cigarette Lighter Plug - Westfalia 82 86 84 Instruction Manual

Notes:

The time of the jump starting process depends on the capacity of the
battery and on the charging state of the battery to be charged.

If the battery is empty, the pedal operation might be very stiff.

To check the current voltage level of the battery while jump starting,
stop operating the foot pedal for approx. 50 seconds. The LEDs of
the voltmeter indicator (2) indicate the current voltage level of the
connected battery.

If the battery still can not be charged after jump starting for several
times and the engine of the vehicle does not start, the battery may
be defective. In this case have the battery replaced with a new one.

Changing the Fuse in the Cigarette Lighter Plug

 If jump starting remains unsuccessful and the charging indicator (3)
does not light up while operating the pedal, the fuse in the cigarette
lighter plug (18) of the charging cable (19) may have blown.
 Replace it with a fuse of the same type and rating (glass fuse 5 A),
as pictured below.
Operation
22