JVC RC-EZ34S Instructions Manual page 15

To pause playback
Press CD 3/8 during playback.
To resume playback, press the button again.
CD
Main unit
Skipping
• To skip back to the previous track
During playback, press 4 once to return to the
beginning of the current track, press twice to skip back
to the beginning of the previous track.
• To skip to the next track
During playback, press ¢ to skip to the beginning
of the next track.
Main unit
Selecting a desired track directly
Use the number buttons on the remote control unit.
In case of an audio CD:
Example:
To select track 8, press "8".
To select track 21, press "2", then "1".
In case of an MP3 disc (during playback):
Example:
Press FOLDER 5 or FOLDER ∞ to select the desired
folder.
To select track 8, press "8".
To select track 21, press "2", then "1".
To select track 115, press "1", "1", then "5".
In case of an MP3 disc (while in stop mode):
Example:
To select track 8 in folder 4,
press "4" for folder number, then "8" for track number.
To select track 21 in folder 15,
press "1" and "5" for folder number, then "2" and "1"
for track number.
To select track 115 in folder 4,
press "4" for folder number, then "1", "1" and "5" for
track number .
Playback starts from the specified track.
Note:
When using the number buttons, press the next button
within 3 seconds after pressing the previous button.
Otherwise the unit recognizes the previously pressed
number and starts playback.
CD/c/a
Remote
r t
Remote
Search – locating a desired position on the
disc
Press and hold 4 or ¢ during playback.
Monitor the sound and release the button when the
desired position is located.
Main unit
Note:
The sound is not produced when searching an MP3 disc.
Selecting a desired track
1 For MP3 discs, press FOLDER 5 or FOLDER ∞
on the remote control unit repeatedly in stop mode,
until the desired folder number is displayed.
2 Press 4 or ¢ to select a desired track from the
current folder.
3 Press CD 3/8 to start playback.
Note:
During playback, if you press FOLDER 5 or FOLDER ∞,
playback skips to the first track of the next or previous
folder, and the track number is shown in the display
window.
Displaying the disc information* (ID3
TAG) (MP3 disc only)
Press DISPLAY on the remote control unit during
playback.
Each time you press the button, the display changes in
the following order.
File information
ID3 TAG information
Normal display(display mode is canceled)
* There may be some cases that the text information is
not displayed.
r t
Remote
11