Download  Print this page

Sony BC-DWX1 Operating Instructions Manual

Hide thumbs

Advertisement

4-739-821-11 (1)
Battery Charger
Operating Instructions
BC-DWX1
© 2018 Sony Corporation

Advertisement

Table of Contents
loading

  Summary of Contents for Sony BC-DWX1

  • Page 1 4-739-821-11 (1) Battery Charger Operating Instructions BC-DWX1 © 2018 Sony Corporation...
  • Page 2: Table Of Contents

    Table of Contents Features ..............3 Important Notes on Operation ........ 3 Notes on Cross Remote ......... 3 Maintaining Performance ........3 Notes on the Battery ..........4 Parts Identification ........... 4 Connecting to the Power Supply or Other Devices ................ 5 Supplying Power via PoE ........
  • Page 3: Features

    Features Important Notes on Operation The BC-DWX1 is a battery charger that can charge two DWT-B03R or NP-BX1 units at the same time. If the unit is suddenly taken from a cold to a warm location, • In addition to charging the NP-BX1 battery packs alone,...
  • Page 4: Notes On The Battery

    DWT-B03R here. b Charging ports Insert the DWT-B03R or NP-BX1 to be charged here. For safety, use only the Sony battery packs and AC adaptors listed below. • NP-BX1 c Charge/discharge status indicators Light according to the charge/discharge status.
  • Page 5: Connecting To The Power Supply Or Other Devices

    Supplying power from a PoE hub network function. Use a pen or paper clip, for example, to press the button. BC-DWX1 Perform RESET button operations without any DWT-B03R or NP-BX1 units inserted. Restoring factory settings Hold down the button for 10 seconds.
  • Page 6: Supplying Power Via An Ac Adapter

    • When multiple units and other devices are connected Charging BC-DWX1 PoE power sourcing equipment Check that there are no foreign objects or particles in the charging port, and insert the DWT-B03R or NP-BX1. The CHARGE indicator of the charging port in which the DWT-B03R or NP-BX1 was inserted lights, and charging starts.
  • Page 7: Using The Storage Function

    Charge/discharge CHARGE indicator Using the Storage status indicators 90% to fully Function charged Full charging complete Storing a battery in a fully charged state will deteriorate the Notes battery and shorten its life cycle. The unit is equipped with a storage function that limits The charge status indicators and the above values are charging to 80% to prevent battery deterioration.
  • Page 8: Connecting To A Network

    The Wireless Studio computer control software allows you to monitor the status of the unit*, portable base units, RMU-01 units, and Sony digital wireless receivers and transmitters from a computer, and allows you to control settings for the unit, receivers, and transmitters remotely.
  • Page 9: Troubleshooting

    Troubleshooting If you encounter a problem when using the unit, check the following. If the problem persists, contact your Sony representative. If the CHARGE indicators blink The CHARGE indicators blink in one of two patterns. The indicators will either blink at about 1.5-second intervals (slow blinking) or at about 0.15-second intervals...
  • Page 10: Licenses

    Disable all of the computer’s ports under the operating system’s network connection settings, and then enable only the port to which the BC-DWX1 is connected. Afterward, restart BC-DWX Setting Tool to perform automatic detection. • The network function is disabled.
  • Page 11: Specifications

    PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER. • SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD PARTIES. • SONY WILL NOT BE LIABLE FOR THE...
  • Page 12 Sony Corporation...