Storage server with intel xeon d processor, up to 128 gb ddr4 ram, quad gbe port, pcie 3.0 x8/x4 slots, 2u rack mount chassis, 450 w redundant psu, rohs
Summary of Contents for IEI Technology GRAND-BDE Series
Page 1
GRAND-BDE Series GRAND-BDE Industrial server MODEL: MODEL: GRAND-BDE Series Storage Server with Intel® Xeon® D Processor, Up to 128 GB DDR4 RAM, Quad GbE Port, PCIe 3.0 x8/x4 Slots, 2U Rack Mount Chassis, 450 W Redundant PSU, RoHS User Manual Page i Rev.
Page 2
GRAND-BDE Series Revision Date Version Changes April 13, 2018 1.00 Initial release Page ii...
Page 3
GRAND-BDE Series Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Page 4
GRAND-BDE Series Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.
GRAND-BDE Series Table of Contents 1 INTRODUCTION ......................1 1.1 O ........................2 VERVIEW 1.2 F ........................2 EATURES 1.3 F ......................3 RONT ANEL 1.3.1 LED Indicator Specifications ................4 1.4 R ....................... 6 ANEL 1.5 S ......................7 PECIFICATIONS 2 UNPACKING .........................
Page 7
GRAND-BDE Series List of Figures Figure 1-1: GRAND-BDE Series Storage Server ................2 Figure 3-1: Power Connection ..................... 27 Figure 3-2: Power Button ......................27 Figure 5-1: Jumper and Connector Locations ................33 Page vii...
Page 8
GRAND-BDE Series List of Tables Table 1-1: Specifications ....................... 8 Table 2-1: Package List ........................ 10 Table 2-2: Optional Items ......................12 Table 5-1: CPLD Connector Pinouts ................... 34 Table 5-2: 10Gbps Host Connector (PCIe Slot 5) Pinouts ............35 Table 5-3: PCIe Power Connector (CON2) Pinouts ..............
Figure 1-1: GRAND-BDE Series Storage Server Powered by an advanced 14nm Intel® Xeon® D 64-bit SoC processor with an integrated PCH, and up to 128 GB DDR4 ECC RDIMM RAM, the GRAND-BDE series storage server delivers outstanding performance for data transmission and applications.
GRAND-BDE Series 1.3 Front Panel GRAND-BDE-18B: GRAND-BDE-30B: Power button LED Indicator: 10 GbE System status Storage expansion port status Page 3...
GRAND-BDE Series 1.3.1 LED Indicator Specifications The LED indicators of the GRAND-BDE indicate the system status and information. The following table lists the LED indicator behavior. Note that the following information is applicable only when users have properly installed the hard drive, and connected the system to the power supply.
Page 13
GRAND-BDE Series LED indicator locations: Page 5...
GRAND-BDE Series 1.4 Rear Panel Gigabit Ethernet port 3 USB 3.0 ports Gigabit Ethernet port 1 Gigabit Ethernet port 2 Power supply unit 1 Gigabit Ethernet port 4 Power supply unit 2 EC GPIO Console port Page 6...
GRAND-BDE Series 1.5 Specifications The specifications for the GRAND-BDE series are listed below. GRAND-BDE-18B GRAND-BDE-30B Intel® Xeon® D series processor Total memory slots: 4 x DDR4 RDIMM/UDIMM Memory Max. memory: DDR4 128 GB (4 x 32 GB RDIMM) Front: 12 x 2.5" / 3.5"...
GRAND-BDE Series 3.46" x 17.42" x 20.89" 3.47" x 17.28" x 19.07" Power Consumption In operation: 255.04 W In operation: 229.53 W Power Supply Redundant power: input 90 to 264VAC; 2 x 450W Operating Temperature 0~40˚C Relative Humidity 5 to 95% non-condensing, wet bulb: 27˚C...
GRAND-BDE Series 2.2 Packing List NOTE: If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the GRAND-BDE was purchased from or contact an IEI sales representative directly by sending an email to sales@ieiworld.com.
GRAND-BDE Series 2.3 Optional Items The following are optional components which may be separately purchased: Item and Part Number Image Dual-port 40GbE QSFP+ network expansion card (P/N: LAN-40G2SF-MLX) Dual-port 10GbE SFP+ network expansion card (P/N: LAN-10G2SF-MLX) Dual-port 10GBASE-T network expansion card...
GRAND-BDE Series Item and Part Number Image MiniSAS cable (SFF-8644 to SFF-8644),1.0 m (P/N: CAB-SAS10M-8644) MiniSAS cable (SFF-8644 to SFF-8644), 0.5m (P/N: CAB-SAS05M-8644) Rail kit for rackmount, max. load 57 kg (P/N: RAIL-A03-57) Table 2-2: Optional Items Page 12...
GRAND-BDE Series 3.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the maintenance of the GRAND-BDE may result in permanent damage to the GRAND-BDE and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the WAFER series motherboard and the power module.
GRAND-BDE Series only be carried out by qualified personnel who are familiar with the associated dangers. Air Circulation: Make sure there is sufficient air circulation when installing the GRAND-BDE. The GRAND-BDE’s cooling vents must not be obstructed by any objects. Blocking the vents can cause overheating of the GRAND-BDE.
GRAND-BDE Series 3.3 Memory Module Installation The GRAND-BDE has four memory slots and supports DDR4 RDIMMs and UDIMMs. To install a memory module, follow the steps below: Step 1: Turn off the GRAND-BDE. Disconnect the power adaptor, network cable(s), and any other connectors or cables from the GRAND-BDE.
Page 25
GRAND-BDE Series Step 7: Line up the notch on the RAM to the break in the slot. Ensure that first RAM module is inserted into slot 1 (see below for slot positioning). Step 8: Set the stick into the slot and apply equal pressure onto both ends of the stick until the clamps on the side click and fully lock the RAM in.
GRAND-BDE Series Step 9: Slide the motherboard drawer back into the GRAND-BDE and pull the handle up to close enclosure and insert screws on the handle. Step 10: Reconnect all cables back into the GRAND-BDE. 3.4 Expansion Card Installation WARNING! The following instructions should only be performed by an authorized and trained technician.
Page 27
GRAND-BDE Series To install expansion card, follow the steps below. Step 1: Turn off the GRAND-BDE. Disconnect the power adaptor, network cable(s), and any other connectors or cables from the GRAND-BDE. Step 2: Before installing the network expansion card, put on an antistatic wrist strap to prevent electrostatic discharge.
Page 28
GRAND-BDE Series Step 5: Remove screw from the expansion slot cover and detach cover. Step 6: Line up the notch on the expansion card to the break in the PCIe slot. Fully insert the expansion card to the expansion slot. Fasten screw to lock in card.
Step 8: Reconnect all cables back into the GRAND-BDE. 3.5 Hard Drive Installation The GRAND-BDE series is compatible with 2.5-inch/3.5-inch SAS and SATA hard drives. NOTE: Before installing hard drives, ensure the disk drives (HDDs/SSDs) that you use are compatible with the GRAND-BDE.
GRAND-BDE Series 3.5.1 Hard Drive Bay Numbering GRAND-BDE-18B (front) bay numbering: GRAND-BDE-18B (rear) bay numbering: GRAND-BDE-18B Front Rear Supports 3.5-inch SAS/SATA Hard Drives Supports 2.5-inch SAS/SATA Hard Drives Supports 2.5-inch SSD Page 22...
Page 31
GRAND-BDE Series GRAND-BDE-30B (front) bay numbering: GRAND-BDE-30B (rear) bay numbering: GRAND-BDE-30B Front Rear Supports 3.5-inch SAS/SATA Hard Drives Supports 2.5-inch SAS/SATA Hard Drives Supports 2.5-inch SSD Page 23...
GRAND-BDE Series 3.5.2 Installing Hard Drive To install hard drives in GRAND-BDE series, follow the steps below: Step 1: Unlock drive tray and remove from enclosure. Step 2: Install a 3.5" or 2.5" disk drive to the tray. Page 24...
Page 33
GRAND-BDE Series Step 3: Insert the drive tray into the GRAND-BDE series, close and lock the latch. The rear panel of the GRAND-BDE has 4 drive slots for installing 2.5" SATA SSD. To install the hard drive into the system, please follow the steps below.
GRAND-BDE Series CAUTION: IEI disclaims any responsibility for product damage/malfunction or data loss/recovery due to misuse or improper installation of hard disks in any occasions for any reasons. 3.6 Power-On Procedure 3.6.1 Installation Checklist WARNING: Make sure a power supply with the correct input voltage is being fed into the system.
GRAND-BDE Series Figure 3-1: Power Connection Step 2: Push the power button (Figure 3-2). Figure 3-2: Power Button Step 3: To turn off the GRAND-BDE, press the power button for 1.5 seconds. To force turn off, press the power button for 5 seconds.
GRAND-BDE Series WARNING: The following instructions should only be performed by an authorized and trained technician. Before starting, please ensure that you turn off the GRAND-BDE, disconnect the power adaptor, network cable(s), and also remove any other device/cable that is attached to the server.
GRAND-BDE Series 4.2 Power Supply Unit Replacement To replace a failed power supply unit, please follow the steps below. Step 1: Turn off the GRAND-BDE. Disconnect the power adaptor, network cable(s), and any other connectors or cables from the GRAND-BDE.
Page 39
GRAND-BDE Series Step 4: Connect the power adaptor and cables to the GRAND-BDE. Step 5: Power on the system. Page 31...
GRAND-BDE Series 5.1 Peripheral Interface Connectors The GRAND-BDE system motherboard comes with a number of peripheral interface connectors. The connector locations are shown in Figure 5-1. The connector pinouts for these connectors are listed in the following sections. Figure 5-1: Jumper and Connector Locations...
GRAND-BDE Series 5.2 External Interface Panel Connectors The table below lists the rear panel connectors on the motherboard. Pinouts of these connectors can be found in the following sections. 5.2.1 Ethernet and USB 3.0 Combo Connectors PIN NO. DESCRIPTION PIN NO.
GRAND-BDE Series Appendix Regulatory Compliance Page 40...
Page 49
GRAND-BDE Series DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives: EMC Directive 2004/108/EC Low-Voltage Directive 2006/95/EC RoHS II Directive 2011/65/EU If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply.
Page 50
GRAND-BDE Series Español [Spanish] IEI Integration Corp declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] IEI Integration Corp ΔΗΛΩΝΕΙ ΟΤΙ ΕΞΟΠΛΙΣΜΟΣ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ...
Page 51
GRAND-BDE Series Româna [Romanian] IEI Integration Corp declară că acest echipament este i conformitate cu cerinţele esenţiale şi cu celelalte prevederi relevante ale Directivei 1999/5/CE. Slovensko [Slovenian] IEI Integration Corp izjavlja, da je ta opreme v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
Page 52
GRAND-BDE Series FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference ...
GRAND-BDE Series WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the GRAND-BDE. B.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: B.1.1 General Safety Precautions...
GRAND-BDE Series B.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the GRAND-BDE may result in permanent damage to the GRAND-BDE and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the GRAND-BDE.
GRAND-BDE Series B.1.3 Product Disposal CAUTION: Risk of explosion if battery is replaced by and incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations. Outside the European Union - If you wish to dispose of used electrical and ...
GRAND-BDE Series The interior of the GRAND-BDE does not require cleaning. Keep fluids away from the GRAND-BDE interior. Be cautious of all small removable components when vacuuming the GRAND-BDE. Turn the GRAND-BDE off before cleaning the GRAND-BDE. ...
GRAND-BDE Series Appendix Hazardous Materials Disclosure Page 50...
Page 59
GRAND-BDE Series The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.