Control Buttons On The Display; Turning The Display On/Off - VESTEL ED24V78/D User Manual

Control Buttons on the Display

To turn on the Display: Press the centre of the side function switch in, the Display will turn on.
To turn the Display off: Press the centre of the side function switch in and hold it down for a few seconds,
the Display will turn into standby mode.
To change source: Press the centre of the side function switch in, the sources list will appear on the screen.
Scroll through the available sources by pushing the side function switch up or down.
To change volume: Increase the volume by pushing the side function switch up. Decrease the volume by
pushing the side function switch down.
Note: Main menu OSD cannot be displayed via side function switch.

Turning the Display On/Off

After connecting the Display to the mains set the main On/Off switch to the "1" position. The Display will switch
into standby mode. Press the Standby button on the remote or press the centre of the side function switch
in located on the rear left side of the Display to switch it on from standby.
Press the centre of the side function switch in and hold it down for a few seconds or press the Standby button
on the remote to switch the Display into standby mode. To switch the Display off, set the On/Off switch to the
"2" position.
Standby button
(*) The location of the On/Off switch may differ depending on the model.
LED Status
Power LED not lit
Power LED lit
Power LED flashing (slow)
Power LED flashing (fast)
Function Switch
Status of the monitor
Power on
Power off (Standby mode)
Scheduler active (optional)
Power up/down and software update
English - 7 -
On/Off
Switch (*)