Table of Contents
Advertisement
Dial out to 2x64k ISDN (H.221)
For improved interoperability with legacy equipment, the two number 2x64k dial-out method can be selected from
the calling IP endpoint instead of using the standard BONDING method.
To instruct the Gateway to use this method, the calling IP endpoint has to combine the dialed number from:
•
A Service Prefix offering at least 128k callrate,
•
The (first) ISDN number to dial out to,
•
Two stars ("**"),
•
The second ISDN number to dial out to.
Example:
•
An H.323 Service prefix for outgoing video calls is defined as "0" (default).
•
The user wants to dial the first ISDN number 67121212 and the second number 67121213.
•
The user dials to "067121212**67121213".
•
Audio and video are transported through the gateway when the call is connected.
NOTE
N
OT ALL ENDPOINTS WILL SEND OUT THE NEEDED NUMBER
(C
, MXP
LASSIC SERIES
UP TO
NUMBER SHOULD BE STORED IN THE PHONEBOOK
LIMITITATION ON THE LENGTH OF THE DIAL STRING
TANDBERG Gateway
(
INCLUDING THE
F2)
,
USING THIS SYNTAX
THE USER HAS TO SELECT
,
H.323
THE
PROFILE HAS TO BE SELECTED EXPLICITLY
.
'*'
). T
CHARACTERS
O MAKE OLDER
H.323
AS THE NETWORK PROFILE TO BE USED
25
TANDBERG
EQUIPMENT
. A
LSO IF SUCH A
. S
OME ENDPOINTS MIGHT HAVE A
Features
Advertisement
Table of Contents
