Sony MHC-V44D Service Manual page 62

MHC-V44D
REVISION HISTORY
Ver. Date
1.0 2016.02
1.1 2016.05
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input ">001Z" in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
New
Addition of Argentina, Australian, African, 220-240 V AC area in E model, 240 V AC area in E model,
Latin-American, Malaysia, Russian and Thai models.
, follow the procedure below.
Description of Revision