Front Panel Section - Sony MHC-V44D Service Manual

2-12. FRONT PANEL SECTION

3 Insert the jig into a space and slowly
remove the front panel section.
Note 1: When using a jig, please work
so as not to injure front panel
section and speaker cabinet.
4 All bosses are removed while moving
jig in the direction of the arrow, and
front panel section is removed.
5 Push the protrusion, and
remove the terminal
(wide side).
5 Push the protrusion,
and remove the terminal
(narrow side).
total sixteen bosses
top side
loudspeaker
(4cm)
protrusion
6 Remove the
front panel
section in
the direction
of an arrow.
1 one screw ((3.5 x 14), TAPPING)
3 Insert the jig into a space and slowly
remove the front panel section.
Note 1: When using a jig, please work
4 All bosses are removed while moving
jig in the direction of the arrow, and
front panel section is removed.
2 two screws ((3.5 x 14), TAPPING)
7 front panel section
Note 2: When installing the front panel section,
remove the used glue and use
a new glue to fix the front panel.
5 Push the protrusion, and remove
the terminal (narrow side).
5 Push the protrusion, and remove
the terminal (wide side).
–
MHC-V44D
so as not to injure front panel
section and speaker cabinet.
top side
loudspeaker
(4cm)
protrusion
–
19