Preparation - Omron Total Power + Heat PM800 Instruction Manual

2.1 Charging
• If you are using the device for the first time or the device has not been used for more than three
months, charge the battery to full.
• Once fully charged,
the battery has been depleted, it takes about five hours to
• Recommended temperature during battery charging: 41 °F to 95 °F (+5 °C to +35 °C)
1
Connect the AC adapter plug to the AC adapter jack on the device.
2
Plug the AC adapter into an electrical outlet.
Electrical outlet
CAUTION
• DO NOT use any AC adapter other than the one provided in the packaging of this device.
Note:
• Make sure not to place your device in a location where it is difficult to plug and unplug the AC
adapter.
• When charging the battery, the "Battery" symbol flashes on the screen.
Charging
• When fully charged, the symbol (
turned off. Press the
• For the battery status, refer to "Battery" (Page 13).

2. PREPARATION

the battery will last for approximately four 30-minute uses on average. Once
Rechargeable battery inside
of device (DO NOT REMOVE)
[Power] button to check that the battery is fully charged.
charge.
) will flash shortly on the screen, then power will be
12