Lens Section; Board - Sony DCR-TRV40 Service Manual

[SERVICE POSITION TO CHECK THE CAMERA SECTION]
Connection to Check the Camera Section
To check the CAMERA section, set the CAMERA to the "Forced camera power ON" mode.
When you want to operate the ZOOM and FOCUS, use the controls on the remote commander (with HOLD switch off).
Setting the "Forced Camera Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 01, and
press the PAUSE button of the adjustment remote
commander.

Lens section

Adjustment remote
commander (RM-95)
Mechanism deck
MA-408 board
DCR-TRV40/TRV40E/TRV50/TRV50E
Exiting the "Forced Camera Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 00, and press
the PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
VC-283 board
JK-219 board
2-19
Extension cord (100P)
(J-6082-413-A)
DD-176 board
Battery terminal board
(6P)
AC power
AC IN
adaptor