Setting The Equalizer; Radio Operation; Fm Antenna; Selecting And Saving Stations Manually - Telefunken MC1004M Instruction Manual

Press
■
Press
You can also use the volume control VOLUME (–/+) to mute and resume the sound. When the unit
displays
Button /
Control
Volume control
4.3

Setting the equalizer

Press EQ to choose a preset equalizer mode. Available settings are:
■
The selected equalizer mode appears briefly on the display, e.g.
■
The selected equalizer mode is saved in the memory even after the appliance is set to
■
standby mode.
5.

RADIO OPERATION

5.1

FM antenna

The appliance is equipped with a FM antenna that has to be connected at the back of the
■
main unit (
Stereo mode is available for FM radio stations.
■
The
■
provide better sound for radio stations.
Unroll the antenna to achieve the best reception.
■
5.2

Selecting and saving stations manually

Press repeatedly the SOURCE button on the appliance (until
■
or press the FM button to choose the radio mode directly.
Press repeatedly the TUN+ or TUN– button to manually search for radio stations (in 0.05 MHz
■
increments).
Press and hold the
■
Press the PROG button to save a radio station.
■
Press the
■
Repeat above operations to save more stations into the appliance memory. Up to 30 FM
■
radio stations can be saved.
Press the
■
5.3

Selecting and saving stations automatically

Press and hold AUTO or
■
frequencies in your area and save them in the memory. Up to 30 FM radio stations can be
saved.
When the search is finished, the appliance automatically tunes to the first programmed FM
■
station ( ).
Press the
■
5.4

Displaying RDS information

RDS (Radio Data System) is a service that allows FM stations to show additional information.
■
If you are tuned to an RDS station, an RDS icon is shown on the display.
Press the RDS key repeatedly while tuned on an RDS radio station to scroll through the
■
available information or to return to normal display.
Note: The type of information varies depending on the selected radio station.
■
6.

CD OPERATION

This appliance reads CD, CD-R/-RW and MP3 CD discs. Other discs are not supported by
■
this appliance.
to mute the sound.
again to resume the sound.
, it turns to mute. When the unit displays
Press / Turn
Press: 1 x
Press: 2 x
Turn: left / right
/
Connecting the antenna).
indicator will be displayed when a strong stereo signal is found. This setting will
appears briefly on the display. After, the current frequency is shown.
,
button to select the desired slot. Press PROG again to confirm.
or
or button to select one of the stations saved to the appliance's memory.
on the main unit for about 3 seconds to scan all available radio
or button to select one of the stations saved to the appliance memory.
is blinking on the display.
Description
mute sound
resume sound
mute / resume sound
/ / /
to automatically search for radio stations.
23
to , it resumes the sound.
Display
to
.
is shown on the display)
is blinking on the display.
/ to
GB