Siemens SITRANS T3K PA Instruction Manual page 116

7NG3213
Max_Diag_Data_Len
Slave_Family
;------- Description of device related diagnosis: -----------------
;
Unit_Diag_Bit(16)
Unit_Diag_Bit(17)
Unit_Diag_Bit(24)
Unit_Diag_Bit(25)
Unit_Diag_Bit(26)
Unit_Diag_Bit(27)
Unit_Diag_Bit(28)
Unit_Diag_Bit(29)
Unit_Diag_Bit(30)
Unit_Diag_Bit(31)
Unit_Diag_Bit(32)
Unit_Diag_Bit(33)
Unit_Diag_Bit(34)
Unit_Diag_Bit(35)
Unit_Diag_Bit(36)
Unit_Diag_Bit(37)
Unit_Diag_Bit(38)
Unit_Diag_Bit(39)
Unit_Diag_Bit(55)
;-----------------------------------------------------------------
;
;Modules for Analog Input
Module = "Temperature
EndModule
Module = "Temperature
EndModule
Hinweis:
Die fett gedruckten "UNIT_DIAG_BIT"s sind realisierte Diagnosebits.
Note:
The semibold "UNIT_DISG_BIT's" are implemented diagnostic bits.
116
Betriebsanleitung/Instruction Manual
= 14
= 12
= "Error appears"
= "Error disappears"
= "Hardware failure electronics"
= "Hardware failure mechanics"
= "Motor temperature too high"
= "Electronic temperature too high"
= "Memory error"
= "Measurement failure"
= "Device not initialized"
= "Device initialization failed"
= "Zero point error"
= "Power supply failed"
= "Configuration invalid"
= "Restart"
= "Coldstart"
= "Maintenance required"
= "Characteristics invalid"
= "Ident_Number violation"
= "Extension Available"
(short)
(long)
" 0x94
" 0x42, 0x84, 0x08, 0x05
SITRANS T3K PA
C79000-B7174-C55-04