Panasonic AW-RP305 Service Manual page 4

i Lens Iris Control [IRIS, LEVEL]
When IRIS AUTO/MANU Switch u is in the MANU
position, the iris can be controlled over the range from
the closed position to the fully open position using this
control. Turning it clockwise opens the iris and turning it
counterclockwise closes the iris.
If the preset memory is called by pressing PRESET
Switch !0 when IRIS AUTO/MANU Switch u is in the
MANU position, the iris is adjusted to the preset value
stored in the memory regardless of the position of this
control. If the control is turned after that, the iris is
adjusted corresponding to the position of the control.
Note: Len iris data may be unable to be stored in the
memory depending on the camera connected.
o Preset Memory Switch [MEMORY]
Head pan/tilt positions, lens zoom/focus/iris (provided
that IRIS AUTO/MANU Switch u is in the MANU posi-
tion), can be preset in up to 10 memory buttons per
pan/tilt head.
To preset them in these buttons, first select a head
pan/tilt position and lens zoom/focus/iris; press MEMO-
RY Switch o (so it lights yellow green and all the 10
buttons of PRESET Switch !0 flash); while keeping the
MEMORY Switch o depressed, press one of the 10
buttons of PRESET Switch !0 ) as desired. The pressed
button in which the selected item is stored lights.
Note: Len iris data may be unable to be stored in the
memory depending on the camera connected.
!0 Preset Position Selection Switch [PRESET]
The head pan/tilt positions and lens zoom/focus/iris that
are stored in the buttons of PRESET Switch !0 can be
recalled to operate the pan/tilt head and the lens
according to the preset data.
To preset them in the PRESET switches, first select a
head pan/tilt position and lens zoom/ focus/iris; press
the MEMORY Switch o (so it lights yellow green and all
the 10 buttons of PRESET Switch !0 flash); at the same
time press one of the 10 buttons of PRESET Switch !0
as desired. The pressed button in which the selected
item is stored lights.
!1 Speed Selection Switch [SPEED]
If ZOOM lever !8 , FOCUS Lever !9 , or PAN/TILT Lever
@0 is moved while keeping SPEED Switch !1
depressed, the corresponding operation takes place at
low speed, provided that SPEED SW CHANGE Switch
@6 is in the LOW position. If one of these levers is
moved with SPEED Switch !1 depressed when SPEED
SW CHANGE Switch @6 is in the HIGH position, the cor-
responding operation takes place at high speed.
SPEED Switch !1 remains lit while it is kept depressed.
!2 Defroster Switch [DEF, ON/OFF]
If this switch is connected to a pan/tilt head with a built-
in defroster function, it switches on and off the defroster.
Note: At the same time as a pan/tilt head is selected
with CONTROL Switch r on the AW-RP305, the
defroster of the selected pan/tilt head is switched on
or off depending on the position of DEF ON/OFF
Switch !2 .
!3 Wiper Switch [WIP, ON/OFF]
If this switch is connected to a pan/tilt head with a built-
in wiper function, it switches on and off the wiper.
Note: At the same time as a pan/tilt head is selected
with CONTROL Switch r on the AW-RP305, the
wiper of the selected pan/tilt head is switched on or
off depending on the position of WIP ON/OFF
Switch !3 .
!4 Heater/Fan Switch [H/F, ON/OFF]
If this switch is connected to a pan/tilt head with a built-
in heater or fan function, it switches on and off the
heater or fan.
Note: At the same time as a pan/tilt head is selected
with CONTROL Switch r on the AW-RP305, the
heater or fan of the selected pan/tilt head is
switched on or off depending on the position of H/F
ON/OFF Switch !4 .
!5 Lens Extender Switch [EXT, ON/OFF]
If this switch is connected to a lens with a built-in exten-
der function, it switches on and off the lens extender.
For details, refer to the Operating Instructions for the
Lenses and Pan/tilt Head.
Note: At the same time as a pan/tilt head is selected
with CONTROL Switch r on the AW-RP305, the
lens extender of the selected pan/tilt head is
switched on or off depending on the position of
Lens EXT ON/OFF Switch !5 .
!6 ND Filter Switch [ND, ON/OFF]
If this switch is connected to a lens with a built-in ND fil-
ter function, it switches on and off the ND filter. For
details, refer to the Operating Instructions for the Lenses
and Pan/tilt Head.
Note: At the same time as a pan/tilt head is selected
with CONTROL Switch r on the AW-RP305, the
ND filter of the selected pan/tilt head is switched on
or off depending on the position of ND ON/OFF
Switch !6 .
!7 Option Switch [OP, ON/OFF]
Controls the option switch terminal on the Pan/tilt Head
AC Adapter (AW-PS300) to short circuit or open it. That
is, the option switch terminal is shorted when OP
ON/OFF Switch !7 is in the ON position, or is opened
when it is in the OFF position. For details, refer to the
Operating Instructions for the Pan/tilt Head AC Adapter.
Note: At the same time as a pan/tilt head is selected
with CONTROL Switch r on the AW-RP305, the
option switch terminal on the selected pan/tilt head
is shorted or opened depending on the position of
OP ON/OFF Switch !7 .
2