NordicTrack T7.5 S User Manual page 12

11. Set the console assembly (L) on the brackets on
11
the console base assembly (G). Do not pinch
any wires. Make sure that the wires (O, 81) are
inserted into the console assembly.
Attach the console assembly (L) with two
5/16" x 1 3/4" Screws (12) and two 5/16" Star
Washers (11); start both Screws, and then
12
tighten them. Note: Only one side is shown.
11 L
G
O, 81
12. Attach the Small Console Cover (27) with two
12
#8 x 3/4" Screws (2); do not overtighten the
Screws. Note: Use the outer two holes in the
underside of the console base assembly (G).
27
G
2
12