Of The Cover Brackets (18) Into The Slot (F) In The - NordicTrack T7.5 S User Manual

5. Remove and save the four 5/16" x 3/4" Patch
Screws (4).
Identify the Left and Right Base Covers (82, 83).
Slide the Left Base Cover onto the Left Upright
(89), and slide the Right Base Cover onto the
Right Upright (90). Do not press the Base
Covers into place yet.
6. See the left drawing. Insert the tab (E) on one

of the Cover Brackets (18) into the slot (F) in the

Left Upright (89), and attach the Cover Bracket
with two #8 x 1/2" Screws (1).
See the right drawing. Attach the other Cover
Bracket (18) to the Right Upright (90) as
described above. Note: On the Right Upright,
the slot (F) is below the two small holes. The
Cover Bracket will need to be rotated 180º
compared to the Cover Bracket on the left
side.
Position the Upright Wire (81) to the left side of
the Right Upright (90) as shown.
5
4
89
82
6
89
F
E
18
1
9
4
90
83
81
90
18
F
E
1