Select The Power Cables; Ensure The Cooling; Protect The Drive And Input Power Cable; Install The Drive On The Wall - ABB ACH580-01 Series Quick Installation And Start-Up Manual

Frames r0 to r3 and r6 to r9

Hide thumbs Also See for ACH580-01 Series:

Table of Contents

32 EN – R6...R9 Quick installation guide

Select the power cables

Size the power cables according to local regulations to carry the nominal current

given on the type designation label of your drive.

R0-

See table

on page

R6-

maximum ambient temperature is 40 C (+104 °F). No condensation or frost is

allowed. For more information on the ambient temperature, see chapter Technical

data in ACH580-01 hardware manual (3AUA0000076331 [English]).

See tables III,

If you use gG fuses, make sure that the operating time of the fuse is below

0.5 seconds. Follow the local regulations.

Warning! The drive module is heavy (45 to 98 kg / 99 to 216 lb). Use a suitable

lifting device. Do not lift the module manually. Make sure that the wall and the

fixing devices can carry the weight.

See figure

R6...R9 Figures A

(UL: table

on page 27) for the heat dissipation. The

and

on pages

and

on page 41.

for the fuses.

Table of Contents