Install Optional Modules, If Any; Install Side Plates And Covers - ABB ACH580-01 Series Quick Installation And Start-Up Manual

Install optional modules, if any

See chapter Electrical installation in ACH580-01 hardware manual
(3AUA0000076331 [English]).

Install side plates and covers

See figure R6...R9 Figures E
IP21
1. Reinstall the side plates of the cable entry box. Tighten the retaining screws with a
screwdriver.
2. Slide the cover of the cable entry box on the module from below until the cover
snaps into place.
3. Reinstall the module cover. Tighten the two retaining screws with a screwdriver.
IP55
1. Reinstall the module cover. Tighten the two retaining screws with a screwdriver.
For start-up instructions, see chapter
EN – R6...R9 Quick installation guide 39
on page 44.
EN – Quick start-up guide on page 49.
R0-
R3
R6-
R9
EN
DA
DE
ES
FI
FR
IT
NL
PL
PT
RU
SV
TR
ZH