Download Print this page
Tamron 360EM User Manual

Tamron 360EM User Manual

Sp af 300mm f/2.8 ld (if) lens for minolta and nikon cameras

Advertisement

Quick Links

(Model 360EM: Minolta)
(Model 360EN: Nikon)
Thank you very much for buying this Tamron lens. The Tamron SP AF 300m
F/2.8 LD (IF) (Model 60E for Minolta, Model 360E for Nikon) lens is a large
aperture telephoto lens developed for Minolta and Nikon AF single lens
reflex cameras. Please read this instruction manual carefully before using
your lens. Proper care and maintenance of this lens will result in years of
enjoyable use.
ATTENTION: these documentations are published only for purpose of study and search,
they are not published for purpose of profit, all the rights and relative copyrights are of
the respective owners.
SP AF 300mm
F/2.8 LD (IF)
Free documentation not to sell.

Advertisement

loading

Summary of Contents for Tamron 360EM

  • Page 1 (Model 360EM: Minolta) (Model 360EN: Nikon) Thank you very much for buying this Tamron lens. The Tamron SP AF 300m F/2.8 LD (IF) (Model 60E for Minolta, Model 360E for Nikon) lens is a large aperture telephoto lens developed for Minolta and Nikon AF single lens reflex cameras.
  • Page 3: Names Of Parts

    Angle of View Minimum Focus Distance Filter Diameter Overall Length Maximum Diameter Weight * Overall length, maximum diameter and weight values are on Nikon basis. 360EN, 360EM 300mm F/2.8 7 groups, 10 elements 8° 2.5m rear 43mm (front 112mm) 217mm (8.6") 120mm (4.7")
  • Page 4: Installation

    INSTALLATION ON CAMERA Installation After removing the rear lens cap from the lens, align the mount positioning point on the lens with that on the camera, and rotate the lens clockwise (counterclockwise when using Nikon model) until you hear a click, which indicates the lens being securely locked in place. There is no mount-positioning index marking on the lens to fit Nikon.
  • Page 5: Aperture Setting

    To install the rear filter, pull out the filter frame from the main body, change the filter (remove the normal filter and install the desired filter), and then insert it so that the TAMRON logo of the filter frame will be at the correct position. Please note if the filter is inserted upside down, the aperture blades will fail.
  • Page 6: Infrared Index

    LENS HOOD A slip-on type lens hood comes with the lens. Since the lens hood is effective for eliminating harm ful rays, we recommend using it when photographing. When storing, the lens hood should be put over the lens in reverse. The lens hood is provided with two opposing lock screws.

This manual is also suitable for:

360en