TallyGenicom MATRIX PRINTER 2150 Reference Manual page 67

Reference manual
Parameter group Parameter
Bidir Bidir = On*
Bidir = Off
I/O
Serial
Baud Baud =
Baud =
Baud =
Baud =
Baud =
Baud = 19200
Format 7 Bit No 2 Stop
7 Bit Even 1 Stop
7 Bit Odd 1 Stop
7 Bit Even 2 Stop
7 Bit Odd 2 Stop
7 Bit Mark 1 Stop
7 Bit Spc 1 Stop
7 Bit Mark 2 Stop
7 Bit Spc 2 Stop
8 Bit No 1 Stop*
8 Bit No 2 Stop
8 Bit Even 1 Stop
8 Bit Odd 1 Stop
8 Bit Mark 1 Stop
8 Bit Spc 1 Stop
PRINT
BACK
Description
Setting On: Printer prints in both directions (bidirectional).
Setting Off: Printer prints only in one direction (from left to right).
600 Selects the data transmission rate (baud rate) (baud = bit per second).
1200 Printer and computer must have the same baud rate.
2400
4800
9600*
Selecting the data format
1. Sets the number of data bits
2. The parity test for received data bytes can be selected. No causes
transmission in both directions without parity bit. If Even or Odd is
selected, the bytes are checked if they have even or odd parity. The
selection of Mark or Spc (Space) causes a data byte transmission with parity
bit, but without checking the received data. Transmission data with parity bit
is always marked with 1 (Mark) or 0 (Spc).
3. Selects one or two stop bits per data byte. (see example in Chapter
Interfaces
)
The Menu
?
QUIT
57