Pelgrim NF970RVS Manual page 58

MAINTENANCE
EN 26
• The ignition plugs should preferably be cleaned with a cloth. Do this
carefully. Otherwise the spark plug can become defective. The spark
plug will only operate correctly in a dry environment. If the plug is
very dirty, you can clean it with a tiny brush.
• Set the pan supports down vertically, without sliding them over the
drip tray.
• Assemble the burner parts using the guide notches. Pay attention
to the notches for the ignition plug and thermocouple. Make sure
the burner parts are lying flat.
Cleaning the pan supports
Do not clean the pan supports in the dishwasher. The enamel on the pan
supports is suitable for cleaning in the dishwasher, but the connection
with the rubber feet is not. The pan supports might also show some
discolouration if washed in the dishwasher. If the rubber feet are lost,
the pan support is likely to damage the drip tray.
Stubborn stains on enamel (pan supports, burner caps and drip tray)
Stubborn stains can best be removed with a liquid cleaning agent.
Never use scouring powder, scouring pads, sharp objects or aggressive
cleaning products.
Cleaning removable burner components
Burner parts should not be cleaned in the dishwasher. Dishwasher
detergents can corrode burner parts! The removable burner
components (including those of the wok) are best cleaned with a mild
cleaning agent and a soft cloth. For stubborn stains, soak the burner
components in hot soapy water. Never use scouring powder, scouring
pads, sharp objects or aggressive cleaning products.