Pelgrim NF970RVS Manual page 60

FAULTS
Problems with the hob
The burner does not burn
evenly.
The burner goes out after
igniting.
Problems with the oven
The main oven does not
switch on.
The main oven does not heat
up.
The small oven does not heat
up.
The main oven does not
switch on/does not heat up.
EN 28
Possible cause
Burner parts not placed
correctly.
Burner parts dirty/damp.
Wrong type of gas used.
Control knob not pressed in
long enough.
Possible cause
It is possible that the digital
timer is programmed. In the
display you will see 'A'.
No temperature set.
No temperature set.
The oven door is not closed
(properly).
Solution
Assemble the burner parts
using the centered ridges.
Clean/dry the burner
components. Make sure that
the outflow holes are open.
Check whether the gas used
is suitable for the appliance.
Contact your installer if it is
not correct.
Keep the control knob pressed
in for at least 10 seconds.
Solution
Cancel the program (see
'Turning off the main oven in
between uses').
Set the temperature using
the temperature knob (see
'Operating the main oven').
Set the temperature using the
control knob (see 'Operating the
small oven').
Close the oven door.