Symptom #4
Image too dark or too light.
Symptom #5
Image not sharp.
Symptom #6
Image does not stabilize.
14
All manuals and user guides at all-guides.com
Possible cause:
1. Illumination level inadequate. Set knob "I" as required.
2. Monitor not adjusted properly.
Possible cause:
1. Adjust focus knob.
2. Illumination level is too high or too low. Adjust
illumination knob.
3. Monitor not adjusted.
4. Substandard cabling. Make sure cables are "ground
shield video" grade.
Possible cause:
Improper "sync" signal. Check peripheral equipment
requirements.
Troubleshooting