Connecting The Artisan; Tm Color Reference System - Sony Trinitron GDM-C520 Operating Instructions Manual

Connecting the Artisan

I. Display and Computer
Before Connecting
❑
To complete the connection between the display and your computer, make sure you have a free USB port at the back of
your computer, or on a USB hub placed near the back of your computer.
❑
Do not use the standard video signal cable that is included in the GDM-C520 box. Instead, use the Artisan
included in the GDM-CA20 Accessory Kit.
❑
The HD15 connector that is closer to the USB connector on your Artisan
port on the back of your computer.
Rear of Computer
2
to USB port
to HD15
port
1
1
Connect and secure the HD15 connector that is on the same end as the USB connector to the VGA port on the back of
your computer.
2
Connect the USB connector on one end of the Artisan
✍
You can also connect the Artisan
3
Connect and secure the HD15 connector on the other end of the Artisan
your GDM-C520.
TM
Color Reference System
TM
Artisan Signal Cable
(Supplied)
TM
Signal Cable to a free USB port at the back of your computer.
TM
Signal Cable to a USB hub. The hub must comply with USB standards.
12
TM
Signal Cable must be connected to the VGA
Rear of Display
3
AC IN
to HD15 port
TM
Signal Cable to the HD15 port on the back of
TM
Signal Cable
2 1