Introduction
1.1
Purpose of this documentation
These instructions contain all information required to commission and use the device. Read the
instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
See also
Technical support (Page 41)
1.2
Document history
The following table shows major changes in the documentation compared to the previous
edition.
Edition
01/2019
1.3
Product compatibility
The following table describes compatibility between document edition and device revision.
Manual
edition
01/2019
NOTICE
Use in a domestic environment
This Class A Group 1 equipment is intended for use in industrial areas.
In a domestic environment this device may cause radio interference.
SITRANS I300 Isolating power supply with EIA-485 interface
Operating Instructions, 01/2019, A5E45099319-AA
Remark
First edition
Remarks
Device revision
First edition
HW: 1.00.00 or later
1
5