Eco Dect - Gigaset CL390 User Manual

Additional functions
Deactivate the baby monitor remotely
The alarm is forwarded to an external destination number.
The receiving phone supports tone dialling.
¤
Accept alarm call
The baby monitor is deactivated and the handset is in idle status. The baby monitor settings
on the handset (e.g. no ringtone) will remain activated until you press the display key Off.
The baby monitor cannot be reactivated remotely.
Reactivate:

ECO DECT

The device range is set to maximum by default. This guarantees the best connection between
handset and base. In idle mode, the handset does not transmit (it is radiation-free). Only the base
maintains contact with the handset, using weak wireless signals. During a call, the transmit
power automatically adapts to the distance between base and handset. The shorter the distance
to the base, the lower the radiation.
Reducing radiation by up to 80%
Enabling/disabling the maximum range:
¤
Menu Settings
radiation reduced)
It is not possible to use a repeater to increase the range.
Disabling radiation in idle mode
The wireless signals of the base are also disabled with the No Radiation setting.
¤
Menu Settings
disabled)
All handsets registered must support this feature.
For speedy set-up of connections for incoming calls, the handset keeps switching to
"ready to receive" momentarily. This increases the power consumption and so
reduces the standby and talk times.
When No Radiation is enabled, there is no range display / range alarm on the
handset. Contactability can be tested by attempting to establish a connection.
¤
Press and hold the Talk key
30
Press keys
p. 29
OK ECO DECT
OK ECO DECT
OK Max. Range
OK No Radiation
. . . the ringing tone sounds.
OK ( = range and
OK ( = Radiation