Gigaset CL390 User Manual page 10

Getting started
Setting up and registering a handset
When you switch on the handset for the first time, an installation assistant starts automatically,
with which you can select the language and country (if available), and register the handset to a
base.
Selecting the language
¤
Select the required language
language
Selecting the country (if available)
¤
Select the country where you use the phone
configured
Registering a handset
Handsets in the packaging have already been registered to the base. In such cases, the installa-
tion assistant is ended and the idle display is shown.
If a handset is not yet registered, it now switches to Register mode.
On the base
¤
Press and hold the Register/Paging key on the base for about 3 seconds.
Once registration is complete, the handset returns to idle mode.
Cancelling the register process:
The phone is now ready for use.
If the assistant is interrupted, such as by an incoming call or because the charge level
is too low, the installation assistant restarts as soon as the handset is back in idle mode.
Manually registering a handset:
10
OK . . . The language selected is set as the display
Press the End call key
p. 32
OK . . . Country-specific settings are