Errors While Scanning; Decoding Preferences Parameter Defaults - Symbol DS6708 Product Reference Manual

5 - 2 DS6708 Digital Scanner Product Reference Guide

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

Decoding Preferences Parameter Defaults

Table 5-5 lists the defaults for decoding preferences parameters. There are two ways to change the default
values:
• Scan the appropriate bar codes in this guide. These new values replace the standard default values in
memory. To recall the default parameter values, scan the
• Configure the digital scanner using the 123Scan configuration program (see
See
NOTE
and miscellaneous default parameters.
Decoding Preferences Parameter Defaults
Table 5-5
Parameter
Decoding Options
Decoding Illumination
Illumination Bank Control
Decode Aiming Pattern
Appendix A, Standard Default Parameters
Parameter Number
F0h 2Ah
F1h 3Bh
F0h 32h
Set Default Parameter on page
Chapter 12,
for all user preferences, hosts, symbologies,
Default
Enable
Full Illumination
Enable
4-4.
123Scan).
Page
Number
5-3
5-4
5-5