Hover-1 Journey H1-JNY Operation Manual page 22

RIDING YOUR JOURNEY SCOOTER
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS
CAN AND MAY LEAD TO DAMAGE TO YOUR DEVICE, VOID YOUR
MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE
SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH.
OPERATING YOUR DEVICE
Make sure the device is fully charged before the first initial use. Before
turning on your Journey scooter, ride it like a normal kick scooter to get
comfortable with the device before using it with the motor.
When comfortable riding the scooter, power it on. For the motor to
activate, you must first start riding the scooter and then push the
Foot-Pad Throttle down with your foot.
To slow down the scooter, disengage the Throttle and squeeze the
Brake handle to engage the disk brake. The Brake is pressure sensitive
so a tighter grip means more stopping power.
To turn, use the handlebar to turn in the direction you wish to turn.
The Journey scooter can be operated manually if you do not wish
to use the motor.
As you get comfortable on the device, you will notice it becomes
easier to maneuver. Remember at higher speeds, it is necessary to
shift your weight to overcome the centrifugal force.
Prepare to brace yourself if you encounter bumps or uneven surfaces,
then dismount and carry your Journey to a safe operating surface.
WARNING
Do not turn sharply or at high speeds to
avoid danger. Do not turn or ride quickly
along slopes, as it may cause injury.
21