Laser Devices - Symbol PPT 8800 Quick Reference Manual

of stamps may be enclosed within the package. If the appropriate stamp is not
provided, please contact your supplier. To apply the country stamp:
1. Peel the stamp appropriate to the country where this device is to be used.
2. Apply the country stamp in the space provided in the battery well.
Operation of the device without a regulatory label or the correct country Stamp is
illegal.

Laser Devices

Symbol devices using lasers comply with US 21CFR1040.10, and IEC825-1:1993,
EN60825-1:1994+A11:1996. The laser classification is marked on one of the labels
on the device.
Class 1 Laser devices are not considered to be hazardous when used for their
intended purpose. The following statement is required to comply with US and
international regulations:
Caution: Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very bright
light source, such as the sun, the user should avoid staring directly into the light
beam. Momentary exposure to a Class 2 laser is not known to be harmful.
Scanning Label
AVOID EXPOSURE - LASER LIGHT IS EMITTED FROM THIS APERTURE
EVITER TOUTE EXPOSITION - LUMIERE LASER EMIS PAR CETTE OUVERTURE
P P T 8 8 0 0
DANGER - LASER LIGHT WHEN OPEN. AVIOD DIRECT
EYE EXPOSURE. ATTENTION - LUMIÈRE LASER EN CAS
D'OVERTURE. EXPOSITION DANGEREUSE AU FAISCEAU
VORSICHT - LASERLICHT, WENN ABDECKUNG
GEÖFFNET. NICHT STRAHL AUSSETZEN. SEE QUICK
REFERENCE GUIDE FOR PATENT INFORMATION
28