LS 3070 Product Reference Guide: Programming
Prefix/Suffix Values
Note: These values will also be used for Advanced Data
To set a PREFIX/SUFFIX value:
1. Scan the option bar code you wish to set.
2. Scan four bar codes from
ASCII value or keystroke you wish to assign (see
page
8-1). The ENTER key is the default for all options.
3. If you make an error, or wish to change your selection, scan CANCEL
Formatting programming. See the Advanced
Programmer's Guide for details.
page 7-44
-
page 7-45
which correspond to the
7-42
ASCII Table beginning on