Information Regarding Disposal; Service; Warning; Note - TAKATA MIDI I-SIZE PLUS Instructions Manual

Reattaching the covers
To fully reattach all MIDI I-SIZE PLUS covers, please
follow the instructions for "Removing the covers" in
reverse.
[MIDI_I-SIZE_PLUS_016] Only use the MIDI I-SIZE
PLUS with original covers, AIRPADS and side crash
pads. These are key safety components and have been
developed specially for use in the MIDI I-SIZE PLUS
seat.

WARNING!

In order to remove the cover, it is only necessary to
open the buckle and to pull the tongues out. It is not
required to take apart the harness system.
[MIDI_I-SIZE_PLUS_055] Should you have
unintentionally disassembled the harness system, please
ensure that, after threading the shoulder straps back into
the back plate, they run over the metal bolt in the back
plate. Similarly, check that the straps are not twisted or
tangled in the belt connection section of the central pull
strap on the underside of the MIDI I-SIZE PLUS.
Cleaning and care
The covers of your MIDI I-SIZE PLUS child car seat
(the adjustable inner padding, the seat cover, and the
belt pads) are removable and washable.

NOTE!

Always check the care instructions on the cover labels,
to see whether or not they are machine washable.
These instructions should take precedence over any
others.
WARNING!
The AIRPADS in the adjustable inner padding and the seat
reducer for babies are not washable and must be removed
from the adjustable inner padding before washing.
WARNING!
[MIDI_I-SIZE_PLUS_048 a + b] Always ensure that
washing.
Check that the belt system is attached properly and
working correctly and that the MIDI I-SIZE PLUS has
not been damaged. Should you have any queries on
this matter, please contact our customer services.
Plastic components can be cleaned with water or a
mild soapy solution. To avoid the build-up of mould,
store the MIDI I-SIZE PLUS in a well-
ventilated, dry place.
7. INFORMATION
REGARDING DISPOSAL
Please follow local regulations when disposing of
MIDI I-SIZE PLUS packaging and the seat itself,
observing any information stated on the packaging and
seat components regarding the materials.

8. SERVICE

As part of our efforts to continually improve our
products, we welcome your feedback. Please send any
comments on issues such as design, user-friendliness,
materials and this instruction manual to our customer
services at:
service.crs@eu.joysonsafety.com
To ensure a swift response, please provide the
the backside of each product) as well as the barcode
number (black and white label on the underside or the
a time stamp on the underside or the backside of the
products (e.g. behind the compartment for the
manual), which also may be helpful for answering
your questions.
de
en
en
fr
it
es
pt
nl
21