Intel ® Lga2066 Cpu Socket - Asus Pro WS C422-ACE Manual

Intel LGA2066 CPU socket
®
Install Intel LGA2066 CPU into this surface mount LGA2066 socket, which is
®
designed for Intel
For more details, refer to 1.3 Central Processing Unit (CPU).
ATX power connectors (24-pin EATXPWR,
8-pin EATX12V_1-2, 6-pin EATX12V3)
Correctly orient the ATX power supply plugs
into these connectors and push down firmly
until the connectors completely fit.
Ensure to connect the 8-pin power plug, or connect both the 8-pin and 6-pin power
plugs.
• The 8-pin Power Plug LED lights up to indicate that the 8-pin power plug is not
connected.
• For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides
a minimum power of 350 W. This PSU type has 24-pin and 8-pin power plugs.
• We recommend that you use a PSU with higher power output when configuring a
system with more power-consuming devices or when you intend to install additional
devices. The system may become unstable or may not boot up if the power is
inadequate.
M.2 sockets (M.2_1-3(SOCKET3))
These sockets allow you to install
M.2 (NGFF) SSD modules.
• The M.2_1 socket supports vertical M Key and 2242/2260/2280/22110 storage
devices (both SATA & PCIE 3.0 x4 mode from PCH).
• The M.2_2 and M.2_3 socket supports M Key and 2242/2260/2280/22110 storage
devices (PCIe 3.0 x4 mode from CPU).
The M.2 SSD module is purchased separately.
ASUS Pro WS C422-ACE
Xeon™ W-Series Processors Family (4-core above) processors.
®
EATX12V_1-2
PIN 1
EATX12V3
EATXPWR
+3 Volts GND
+12 Volts +5 Volts
+12 Volts +5 Volts
+5V Standby +5 Volts
Power OK -5 Volts
GND GND
+5 Volts GND
GND GND
+5 Volts PSON#
GND GND
+3 Volts -12 Volts
+3 Volts +3 Volts
PIN 1
M.2_1(SOCKET3)
EATX12V_1-2
PIN 1
EATXPWR
+3 Volts GND
+12 Volts +5 Volts
+5 Volts
+12 Volts
+5V Standby +5 Volts
Power OK -5 Volts
GND GND
+5 Volts GND
GND
GND
+5 Volts PSON#
GND GND
+3 Volts -12 Volts
+3 Volts +3 Volts
PIN 1
M.2_2-3(SOCKET3)
1-3