Clear Rtc Ram (2-Pin Clrtc) - Asus Pro WS C422-ACE Manual

Clear RTC RAM (2-pin CLRTC)

This header allows you to clear the CMOS RTC RAM data of
the system setup information such as date, time, and system
passwords.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Use a metal object such as a screwdriver to short the two
pins.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and
enter BIOS setup to re-enter data.
If the steps above do not help, remove the onboard battery and short the two pins again
to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the battery.
Thermal Sensor connector (2-pin T_SENSOR)
The Thermal Sensor connector allows you to connect a
sensor to monitor the temperature of the devices and the
critical components inside the motherboard. Connect the
thermal sensor and place it on the device or the motherboard's
component to detect its temperature.
Node connector (12-1 pin NODE)
The Node connector allows you to connect Node
compatible devices.
Visit www.asus.com for more information about the devices and the latest compatibility
list.
TPM connector (14-1 pin TPM)
This connector supports a Trusted Platform Module (TPM)
system, which securely store keys, digital certificates,
passwords and data. A TPM system also helps enhance
network security, protect digital identities, and ensures
platform integrity.
1-6
CLRTC
PIN 1
Chapter 1: Product Introduction