Asus WS C422 SAGE/10G Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Motherboard
  5. WS C422 SAGE/10G
  6. Manual
Asus WS C422 SAGE/10G Manual

Asus WS C422 SAGE/10G Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WS C422
SAGE/10G

Advertisement

Table of Contents
loading

Related Manuals for Asus WS C422 SAGE/10G

Summary of Contents for Asus WS C422 SAGE/10G

  • Page 1 WS C422 SAGE/10G...
  • Page 2 Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Page 3: Table Of Contents

    Contents Safety information ...................... vi About this guide ......................vii WS C422 SAGE/10G specifications summary ............ix Package contents ..................... xiii Installation tools and components ................. xiv Chapter 1: Product Introduction Motherboard overview ................1-1 1.1.1 Before you proceed ..............1-1 1.1.2...
  • Page 4 3.6.13 PCH-FW Configuration ............. 3-19 Monitor menu ................... 3-19 Boot menu ....................3-19 Tool menu ....................3-21 3.9.1 ASUS EZ Flash 3 Utility ............3-21 3.9.2 Secure Erase ................3-22 3.9.3 ASUS Overclocking Profile ............3-23 3.9.4 ASUS SPD Information ............. 3-23 3.9.5...
  • Page 5 Installing four SLI-ready graphics cards ........5-9 5.2.5 Installing the device drivers ............5-10 5.2.6 Enabling the NVIDIA technology ........5-10 ® ® Appendix WS C422 SAGE/10G block diagram (48-Lane) ............. A-1 Q-Code table ......................A-2 Notices ........................A-5 ASUS contact information ..................A-10...

  • Page 6: Safety Information

    Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

  • Page 7: About This Guide

    Refer to the following sources for additional information and for product and software updates. ASUS website The ASUS website (www.asus.com) provides updated information on ASUS hardware and software products. Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer.
  • Page 8 Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task.

  • Page 9: Ws C422 Sage/10G Specifications Summary

    WS C422 SAGE/10G specifications summary LGA2066 Socket for Intel Xeon-W Series Processors ® Supports 14nm CPU Supports Intel Turbo Boost Technology 2.0** ® * Refer to www.asus.com for Intel CPU support list. ® ** Support of these features depends on the CPU types.
  • Page 10 4 x USB 3.1 Gen 1 ports (Blue) Ports 2 x Intel LAN (RJ45) Ports 8-channel Audio I/O Ports Supporting ASUS Control Center (ACC) Management IT software DIGI+ Power Control - CPU Power: Digital 8-phase power design - DRAM Power: Digital 2-phase power design...
  • Page 11 Ai Charger + File Transfer ASUS Q-Design: Features - ASUS Q-Shield - ASUS Q-Code - ASUS Q-LED (CPU, DRAM, VGA, Boot Device LED) - ASUS Q-Slot - ASUS Q-DIMM - ASUS Q-Connector ASUS BIOS FlashBack™ Onboard Button: Power/Reset UEFI BIOS...
  • Page 12 1 x BIOS FlashBack™ Button Operating Windows 10 64-bit ® system support CEB Form Factor, 12” x 10.5” (30.5cm x 26.7cm) Form factor • Specifications are subject to change without notice. • Visit the ASUS website for the software manual.

  • Page 13: Package Contents

    Package contents Check your motherboard package for the following items. Motherboard 1 x WS C422 SAGE/10G motherboard 8 x SATA 6Gb/s cables Cables 1 x Extension cable for Addressable LED 1 x M.2 screws kit 1 x Vertical M.2 bracket set...

  • Page 14: Installation Tools And Components

    Installation tools and components Intel ® LGA 2066 CPU Intel LGA 2066 compatible CPU Fan ® Phillips (cross) screwdriver SATA hard disk drive PC chassis DIMM 1 bag of screws Power supply unit SATA optical disc drive (optional) Graphics card M.2 SSD module (optional) The tools and components in the table above are not included in the motherboard package.

  • Page 15: Chapter 1: Product Introduction

    Chapter 1: Product Introduction Product Introduction Motherboard overview 1.1.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity. • Hold components by the edges to avoid touching the ICs on them. • Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. ASUS WS C422 SAGE/10G...

  • Page 16: Motherboard Layout

    1.1.2 Motherboard layout Refer to 1.1.9 Internal connectors and 2.3.1 Rear I/O connection for more information about rear panel connectors and internal connectors. Chapter 1: Product Introduction...
  • Page 17 13. VROC_HW_KEY connector (4-pin VROC_HW_KEY) 1-26 14. USB 3.1 Gen 1 connectors (20-1 pin U31G1_12) 1-17 15. CPU Over Voltage jumper (3-pin CPU_OV) 1-12 16. TPM connector (14-1 pin TPM1) 1-26 17. RGB header (4-pin RGB_HEADER1) 1-24 18. Addressable RGB header (4-pin ADD_HEADER) 1-25 19. Serial port connector (10-1 pin COM1) 1-23 20. Clear CMOS button (CLR_CMOS) 1-11 21. Q-Code LEDs 1-14 22. Reset button 23. Power-on button 24. Front panel audio connector (10-1 pin AAFP) 1-16 25. Thunderbolt header (5-pin TB_HEADER) 1-21 ASUS WS C422 SAGE/10G...

  • Page 18: Central Processing Unit (Cpu)

    1.1.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA2066 socket designed for the Intel Xeon ® W-Series Processors. • Ensure that you install the correct CPU designed for LGA2066 socket only. DO NOT install a CPU designed for other sockets on the LGA2066 socket. • Ensure that all power cables are unplugged before installing the CPU. • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related. • Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA2066 socket. • The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap. Chapter 1: Product Introduction...

  • Page 19: System Memory

    1.1.4 System memory The motherboard comes with eight DDR4 (Double Data Rate 4) Dual Inline Memory Modules (DIMM) slots. A DDR4 module is notched differently from a DDR, DDR2, or DDR3 module. DO NOT install a DDR, DDR2, or DDR3 memory module to the DDR4 slot. Recommended memory configurations Intel Skylake/Cascade Lake-W Series Processors ® ASUS WS C422 SAGE/10G...
  • Page 20 Memory configurations You may install 4 GB, 8 GB, 16 GB, 32 GB, and 64 GB RDIMMs; and 32 GB, 64 GB, and 128 GB LRDIMMs into the DIMM sockets. You may install varying memory sizes in Channel A, Channel B, Channel C, and Channel D. The system maps the total size of the lower-sized channel for the quad-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. • For system stability, use a more efficient memory cooling system to support a full memory load (8 DIMMs) or overclocking condition. • Always install the DIMMS with the same CAS Latency. For an optimum compatibility, we recommend that you install memory modules of the same version or data code (D/C) from the same vendor. Check with the vendor to get the correct memory modules. • Visit the ASUS website for the latest QVL. Chapter 1: Product Introduction...

  • Page 21: Expansion Slots

    1.1.5 Expansion slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot No. Slot Description PCIe 3.0/2.0 x16_1 slot PCIe 3.0/2.0 x16_2 slot (x0/x8 mode) PCIe 3.0/2.0 x16_3 slot (x16/x8 mode) PCIe 3.0/2.0 x16_4 slot (x0/x8 mode) PCIe 3.0/2.0 x16_5 slot (x16/x8 mode) PCIe 3.0/2.0 x16_6 slot (x0/x8 mode) PCIe 3.0/2.0 x16_7 slot (x16/x8 mode) ASUS WS C422 SAGE/10G...
  • Page 22 PCI Express 3.0 operating mode PCIe PCIe PCIe PCIe PCIe PCIe PCIe 3.0/2.0 3.0/2.0 3.0/2.0 3.0/2.0 3.0/2.0 3.0/2.0 3.0/2.0 configuration x16_1 x16_2 x16_3 x16_4 x16_5 x16_6 x16_7 x16 (single Single VGA/ VGA PCIe card recommended) Dual VGA/PCIe cards Triple VGA/ PCIe cards Quad VGA/ PCIe cards Septuple VGA/ PCIe cards •...

  • Page 23: Onboard Buttons And Switches

    1.1.6 Onboard buttons and switches Onboard buttons and switches allow you to fine-tune performance when working on a bare or open-case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance. Power-on button The motherboard comes with a power-on button that allows you to power up or wake up the system. The button also lights up when the system is plugged to a power source indicating that you should shut down the system and unplug the power cable before removing or installing any motherboard component. Reset button Press the reset button to reboot the system. ASUS WS C422 SAGE/10G...
  • Page 24 MemOK! button lights continuously, press the MemOK! button until the DRAM_LED starts blinking. System will begin automatic memory compatibility tuning and reboot for successful boot. • Refer to section 1.1.8 Onboard LEDs for the exact location of the DRAM_LED. • The DRAM_LED also lights up when the DIMM is not properly installed. Turn off the system and reinstall the DIMM before using the MemOK! function. • The MemOK! button does not function under Windows OS environment. ® • During the tuning process, the system loads and tests failsafe memory settings. It takes about 30 seconds for the system to test one set of failsafe settings. If the test fails, the system reboots and tests the next set of failsafe settings. The blinking speed of the DRAM_LED increases, indicating different test processes. • Due to memory tuning requirement, the system automatically reboots when each timing set is tested. If the installed DIMMs still fail to boot after the whole tuning process, the DRAM_LED lights continuously. Replace the DIMMs with ones recommended in the Memory QVL (Qualified Vendors Lists) at www.asus.com. • If you turn off the computer and replace DIMMs during the tuning process, the system continues memory tuning after turning on the computer. To stop memory tuning, turn off the computer and unplug the power cord for about 5–10 seconds. • If your system fails to boot up due to BIOS overclocking, press the MemOK! button to boot and load the BIOS default settings. A message will appear during POST reminding you that the BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from www.asus.com after using the MemOK! function. Chapter 1: Product Introduction 1-10...
  • Page 25 Clear CMOS button (CLR_CMOS) Press this button to clear the BIOS setup information only when the systems hangs due to overclocking. ASUS WS C422 SAGE/10G 1-11...

  • Page 26: Jumpers

    1.1.7 Jumpers CPU Over Voltage jumper (3-pin CPU_OV) The CPU Over Voltage jumper allows you to set a higher CPU voltage for a flexible overclocking system, depending on the type of the installed CPU. To gain more CPU voltage setting, insert the jumper to pins 2-3. To go back to its default CPU voltage setting, insert the jumper to pins 1-2. Chapter 1: Product Introduction 1-12...

  • Page 27: Onboard Leds

    1.1.8 Onboard LEDs POST State LEDs The POST State LEDs provide the status of these key components during POST (Power-On Self-Test): CPU, memory modules, VGA card, and hard disk drives. If an error is found, the critical component’s LED stays lit up until the problem is solved. The POST State LEDs provide the most probable cause of an error code as a starting point for troubleshooting. The actual cause may vary from case to case. M.2 LEDs (M.2_1_LED; M.2_2_LED) The M.2 LED near the M.2 socket will light up when an SATA SSD device is detected. This motherboard supports PCIe SSD devices only. ASUS WS C422 SAGE/10G 1-13...
  • Page 28 Q-Code LEDs The Q-Code LED design provides you with a 2-digit error code that displays the system status. Refer to the Q-Code table on the next page for details. • The Q-Code LEDs provide the most probable cause of an error code as a starting point for troubleshooting. The actual cause may vary from case to case. • Please refer to the Q-Code table in the Appendix section for more details. Chapter 1: Product Introduction 1-14...

  • Page 29: Internal Connectors

    1.1.9 Internal connectors Intel SATA 6 Gb/s connectors (7-pin SATA6G_12; SATA 6G_34; ® SATA 6G_56; SATA 6G_78) These connectors connect to SATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel Rapid Storage Technology through the onboard Intel ® ® C422 chipset. These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [Intel RST Premium (RAID)]. ASUS WS C422 SAGE/10G 1-15...
  • Page 30 Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports HD Audio. Connect one end of the front panel audio I/O module cable to this connector. We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability. USB 3.1 Gen 2 front panel connector (U31G2_E3) This connector allows you to connect a USB 3.1 Gen 2 module for additional USB 3.1 Gen 2 ports. The latest USB 3.1 Gen 2 connectivity provides data transfer speeds of up to 10 Gbps. Chapter 1: Product Introduction 1-16...
  • Page 31 USB 3.1 Gen 1 connectors (20-1 pin U31G1_12) This connector allows you to connect a USB 3.1 Gen 1 module for additional USB 3.1 Gen 1 front or rear panel ports. With an installed USB 3.1 Gen 1 module, you can enjoy all the benefits of USB 3.1 Gen 1 including faster data transfer speeds of up to 5 Gb/s, faster charging time for USB-chargeable devices, optimized power efficiency, and backward compatibility with USB 2.0. The USB 3.1 Gen 1 module is purchased separately. The plugged USB 3.1 Gen 1 device may run on xHCI or EHCI mode depending on the operating system’s setting. ASUS WS C422 SAGE/10G 1-17...
  • Page 32 Fan and pump connectors (4-pin CPU_FAN; 4-pin CPU_OPT; 4-pin AIO_PUMP; 4-pin W_PUMP+; 4-pin M.2_FAN; 5-pin EXT_FAN; 4-pin CHA_FAN1-2) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. • DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! Do not place jumper caps on the fan connectors! • Ensure that the CPU fan cable is securely installed to the CPU fan connector. • The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power. • W_PUMP+ function support depends on water cooling device. • Connect the fan of your water cooling kit to the AIO_PUMP connector. Chapter 1: Product Introduction 1-18...
  • Page 33 ATX power connectors (24-pin EATXPWR; 8-pin EATX12V1-2; 6-pin EATX12V3) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. • DO NOT connect the 6-pin power plug only, the motherboard may overheat under heavy usage. • Ensure to connect the 8-pin power plug, or connect both the 8-pin and 6-pin power plugs. • For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a minimum power of 350 W. • We recommend that you use a PSU with a higher power output when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate. • If you want to use two or more high-end PCI Express x16 cards, use a PSU with 1000W power or above to ensure the system stability. ASUS WS C422 SAGE/10G 1-19...
  • Page 34 System panel connector (20-3 pin PANEL) This connector supports several chassis-mounted functions. • System power LED (2-pin or 3-1 pin PLED) The 2-pin or 3-1 pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • Hard disk drive activity LED (2-pin HDD_LED) This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The HDD LED lights up or flashes when data is read from or written to the HDD. • System warning speaker (4-pin SPEAKER) This 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. • ATX power button/soft-off button (2-pin PWRSW) This connector is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the operating system settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. • Chassis intrusion connector (2-pin CHASSIS) This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. Chapter 1: Product Introduction 1-20...
  • Page 35 Thunderbolt header (5-pin TB_HEADER) This connector is for the add-on Thunderbolt I/O card that supports Intel’s Thunderbolt Technology, allowing you to connect up to six Thunderbolt-enabled devices and a DisplayPort-enabled display in a daisy-chain configuration. U.2 connectors (U.2_1-2) This motherboard comes with U.2 connectors which support PCIe 3.0 x4 NVM Express storage. ASUS WS C422 SAGE/10G 1-21...
  • Page 36 M.2 sockets (M.2_1(Socket 3); M.2_2(Socket 3)) These sockets allow you to install M.2 SSD modules. • M.2_1 socket supports PCIe 3.0 x4 mode M Key design and type 2242 / 2260/ 2280 / 22110 PCIe storage devices. • M.2_2 socket supports PCIe 3.0 x4 mode M Key design and type 2242 / 2260 / 2280 PCIe storage devices. • These sockets support RSTe (Intel Rapid Storage Technology enterprise). ® • Due to hardware design, RAID Volume between M.2_1 and M.2_2 is not supported. • The M.2 SSD module is purchased separately. • This motherboard supports PCIe SSD devices only. • The M.2 LED near the M.2 socket will light up when an SATA SSD device is detected. Refer to section 1.1.8 Onboard LEDs for the exact location of the M.2 LED. Chapter 1: Product Introduction 1-22...
  • Page 37 Thermal sensor connector (2-pin T_SENSOR) This connector is for the thermistor cable that monitors the temperature of the devices and the critical components inside the motherboard. Connect the thermistor cable and place the sensor on the device or the motherboard’s component to detect its temperature. The thermal sensor is purchased separately. Serial port connector (10-1 pin COM1) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. ASUS WS C422 SAGE/10G 1-23...
  • Page 38 RGB header (4-pin RGB_HEADER1) This connector is for RGB LED strips. The RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 2A (12V), and no longer than 2 m. Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. • Actual lighting and color will vary with LED strip. • If your LED strip does not light up, check if the RGB LED extension cable and the RGB LED strip is connected in the correct orientation, and the 12V connector is aligned with the 12V header on the motherboard. • The LED strip will only light up under the operating system. • The LED strip is purchased separately. Chapter 1: Product Introduction 1-24...
  • Page 39 Addressable RGB header (4-pin ADD_HEADER) This connector is for individually addressable RGB WS2812B LED strips or WS2812B based LED strips. The addressable RGB header supports WS2812B addressable RGB LED strips (5V/Data/ Ground), with a maximum power rating of 3A (5V) and a maximum of 60 LEDs. Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. • Actual lighting and color will vary with LED strip. • If your LED strip does not light up, check if the addressable RGB LED strip is connected in the correct orientation, and the 5V connector is aligned with the 5V header on the motherboard. • The addressable RGB LED strip will only light up under the operating system. • The addressable RGB LED strip is purchased separately. ASUS WS C422 SAGE/10G 1-25...
  • Page 40 VROC_HW_KEY connector (4-pin VROC_HW_KEY) This connector allows you to connect a KEY module to enable additional CPU RAID functions with Intel CPU RSTe. ® The KEY module is purchased separately. TPM connector (14-1 pin TPM1) This connector supports a Trusted Platform Module (TPM) system, which securely store keys, digital certificates, passwords and data. A TPM system also helps enhance network security, protect digital identities, and ensures platform integrity. The TPM module is purchased separately. Chapter 1: Product Introduction 1-26...

  • Page 41: Chapter 2: Basic Installation

    2.1.1 Motherboard installation Install the ASUS Q-Shield to the chassis rear I/O panel. Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’ rear I/O panel.
  • Page 42 Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard. Chapter 2: Basic Installation...

  • Page 43: Cpu Installation

    Please note the order in opening/ closing the double latch. Follow the instructions printed on the metal sealing hatch or the illustrations shown below in this manual. The plastic cap will pop up automatically once the CPU is in place and the hatch properly sealed down. ASUS WS C422 SAGE/10G...
  • Page 44 Triangle mark Triangle mark Chapter 2: Basic Installation...

  • Page 45: Cpu Heatsink And Fan Assembly Installation

    2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary. To install the CPU heatsink and fan assembly ASUS WS C422 SAGE/10G...

  • Page 46: Dimm Installation

    2.1.4 DIMM installation To remove a DIMM Chapter 2: Basic Installation...

  • Page 47: Atx Power Connection

    2.1.5 ATX power connection • DO NOT connect the 6-pin power plug only, the motherboard may overheat under heavy usage. • Ensure to connect the 8-pin power plug, or connect both the 8-pin and 6-pin power plugs. ASUS WS C422 SAGE/10G...

  • Page 48: Sata Device Connection

    2.1.6 SATA device connection Chapter 2: Basic Installation...

  • Page 49: Front I/O Connector

    To install USB 3.1 Gen 2 connector USB 3.1 Gen 2 This connector will only fit in one orientation. Push the connector until it clicks into place. To install USB 3.1 Gen 1 connector To install front panel audio connector USB 3.1 Gen 1 AAFP ASUS WS C422 SAGE/10G...

  • Page 50: Expansion Card Installation

    2.1.8 Expansion card installation To install PCIe x16 cards Chapter 2: Basic Installation 2-10...

  • Page 51: M.2 Installation

    2.1.9 M.2 installation Supported M.2 type varies per motherboard. ASUS WS C422 SAGE/10G 2-11...

  • Page 52: Bios Update Utility

    We recommend you to use a USB 2.0 storage device to save the latest BIOS version for better compatibility and stability. BIOS FlashBack™ port Visit https://www.asus.com/support/ and download the latest BIOS version for this motherboard. Rename the file as WSCTG.CAP, then copy it to your USB storage device.
  • Page 53 BIOS Flashback is not operating properly. This may be caused by improper installation of the USB storage device and filename/file format error. If this scenario happens, please restart the system to turn off the light. • Updating BIOS may have risks. If the BIOS program is damaged during the process and results to the system’s failure to boot up, please contact your local ASUS Service Center. ASUS WS C422 SAGE/10G 2-13...

  • Page 54: Motherboard Rear And Audio Connections

    Motherboard rear and audio connections 2.3.1 Rear I/O connection BIOS FlashBack™ port Rear panel connectors USB 3.1 Gen 2 Type-A port E2 USB 3.1 Gen 2 Type-C port EC1 ® Intel 10G LAN port (LAN2)* Optical S/PDIF Out port ® Intel 10G LAN port (LAN1)* Audio I/O ports** ® USB 3.1 Gen 1 ports 8, 9, 10 and 11 (bottom port supports BIOS FlashBack™) * and **: Refer to the tables on the next page for the LAN port LEDs and audio port definitions. •...
  • Page 55 Line Out Front Speaker Out Front Speaker Out Front Speaker Out Pink Mic In Mic In Mic In Mic In Orange – – Center/Subwoofer Center/Subwoofer Black – Rear Speaker Out Rear Speaker Out Rear Speaker Out ASUS WS C422 SAGE/10G 2-15...

  • Page 56: Audio I/O Connections

    2.3.2 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2-channel Speakers Chapter 2: Basic Installation 2-16...
  • Page 57 Connect to 4-channel Speakers Connect to 5.1-channel Speakers Connect to 7.1-channel Speakers ASUS WS C422 SAGE/10G 2-17...

  • Page 58: Starting Up For The First Time

    Starting up for the first time After making all the connections, replace the system case cover. Ensure that all switches are off. Connect the power cord to the power connector at the back of the system chassis. Connect the power cord to a power outlet that is equipped with a surge protector. Turn on the devices in the following order: Monitor External SCSI devices (starting with the last device on the chain)

  • Page 59: Chapter 3: Bios Setup

    BIOS Setup Knowing BIOS The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard- only BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system.

  • Page 60: Bios Setup Program

    RTC RAM via the Clear CMOS button. • The BIOS setup program does not support the Bluetooth devices. Please visit ASUS website for the detailed BIOS content manual. BIOS menu screen The BIOS Setup program can be used under two modes: EZ Mode and Advanced Mode.

  • Page 61: Ez Mode

    Click to go to Advanced mode Loads optimized Search on the FAQ default settings Click to display boot devices Selects the boot device priority The boot device options vary depending on the devices you installed to the system. ASUS WS C422 SAGE/10G...

  • Page 62: Advanced Mode

    3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations. To switch from EZ Mode to Advanced Mode, click Advanced Mode(F7) or press the <F7> hotkey.
  • Page 63 Refer to section 3.2.3 QFan Control for more information. EZ Tuning Wizard (F11) This button above the menu bar allows you to change the motherboard’s SATA mode from AHCI to RAID mode. Refer to section 3.2.4 EZ Tuning Wizard for more information. ASUS WS C422 SAGE/10G...
  • Page 64 Move your mouse over this button to show a QR code, scan this QR code on your mobile device to connect to the BIOS FAQ web page of the ASUS support website. You can also scan the following QR code: Hot keys This button above the menu bar contains the navigation keys for the BIOS setup program.

  • Page 65: Qfan Control

    Click to activate DC Mode configured PWM Mode Select a profile to apply to Click to apply the fan setting your fans Click to undo the Click to go back to main menu changes Select to manually configure your fans ASUS WS C422 SAGE/10G...
  • Page 66 Configuring fans manually Select Manual from the list of profiles to manually configure your fans’ operating speed. Speed points Select to manually configure your fans To configure your fans: Select the fan that you want to configure and to view its current status. Click and drag the speed points to adjust the fans’...

  • Page 67: Ez Tuning Wizard

    BIOS screen to open EZ Tuning Wizard screen. Click Yes to enable RAID. • Ensure that your HDDs have no existing RAID volumes. • Ensure to connect your HDDs to Intel SATA connectors. ® ASUS WS C422 SAGE/10G...
  • Page 68 Select the port that you want to set to [RAID] mode, CPU or SATA, then click Next. • CPU (VROC mode): Supports Intel Virtual Raid on CPU. This feature requires a KEY ® module (purchased separately) and Intel SSD modules. ®...
  • Page 69 After selecting the type of RAID, click Next then click Yes to continue the RAID setup. After the RAID setup is done, click Yes to exit the setup then click OK to reset your system. ASUS WS C422 SAGE/10G 3-11...

  • Page 70: My Favorites

    My Favorites My Favorites is your personal space where you can easily save and access your favorite BIOS items. My Favorites comes with several performance, power saving, and fast boot related items by default. You can personalize this screen by adding or removing items. Chapter 3: BIOS Setup 3-12...
  • Page 71 Configuration items such as Memory SPD Information, system time and date. Click Exit (ESC) or press <Esc> key to close Setup Tree Map screen. Go to My Favorites menu to view the saved BIOS items. ASUS WS C422 SAGE/10G 3-13...

  • Page 72: Main Menu

    Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. Security The Security menu items allow you to change the system security settings.

  • Page 73: Advanced Menu

    The items in this menu allow you to change the ASPM for PCH and SA PCI Express. 3.6.3 System Agent (SA) Configuration The items in this menu allow you to adjust the Link Speed for PEG Port and Multi-Monitor. ASUS WS C422 SAGE/10G 3-15...

  • Page 74: Pch Configuration

    3.6.4 PCH Configuration The items in this menu allow you to adjust the PCH PCI Express speed. PCI Express Configuration This item allows you to configure the PCI Express slots. PCIe Speed This item allows your system to automatically select the PCI Express port speed. Configuration options: [Auto] [Gen1 (2.5 GT/s)] [Gen2 (5 GT/s)] [Gen3 (8 GT/s)] 3.6.5 PCH Storage Configuration...

  • Page 75: Cpu Storage Configuration

    This item allows you to turn the RGB LED lighting on or off when the system is in the sleep, hibernate or soft off states. Configuration options: [On] [Off] Intel LAN Controller This item allows you to enable or disable the Intel LAN controller. Configuration options: [Disabled] [Enabled] ASUS WS C422 SAGE/10G 3-17...

  • Page 76: Apm Configuration

    3.6.8 APM Configuration The items in this menu allow you to set system wake and sleep settings. ErP Ready This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)] 3.6.9 Network Stack Configuration...

  • Page 77: Thunderbolt(Tm) Configuration

    Next Boot after AC Power Loss [Normal Boot] Returns to normal boot on the next boot after an AC power loss. [Fast Boot] Accelerates the boot speed on the next boot after an AC power loss. ASUS WS C422 SAGE/10G 3-19...
  • Page 78 Boot Configuration Setup Mode [Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST. [EZ Mode] This item allows you to go to EZ Mode of the BIOS after POST. CSM (Compatibility Support Module) This item allows you to configure the CSM (Compatibility Support Module) items to fully support the various VGA, bootable devices and add-on devices for better compatibility.

  • Page 79: Tool Menu

    3.9.1 ASUS EZ Flash 3 Utility This item allows you to run ASUS EZ Flash 3. When you press <Enter>, a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to confirm your choice.

  • Page 80: Secure Erase

    To launch Secure Erase, click Tool > Secure Erase on the Advanced mode menu. Check the ASUS support site for a full list of SSDs tested with Secure Erase. The drive may become unstable if you run Secure Erase on an incompatible SSD.

  • Page 81: Asus Overclocking Profile

    This item displays the information and recommended configuration for the PCIE slots that the graphics card is installed in your system. This feature is only supported on selected ASUS graphics cards. Bus Interface This item allows you to select the bus interface.

  • Page 82: Exit Menu

    3.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus.

  • Page 83: Updating Bios

    ® ASUS EZ Flash 3: Updates the BIOS using a USB flash drive. ASUS CrashFree BIOS 3: Restores the BIOS using the motherboard support DVD or a USB flash drive when the BIOS file fails or gets corrupted. 3.11.1...

  • Page 84: Asus Ez Flash 3

    3.11.2 ASUS EZ Flash 3 ASUS EZ Flash 3 allows you to download and update to the latest BIOS through the Internet without having to use a bootable floppy disk or an OS-based utility. Updating through the Internet varies per region and Internet conditions. Check your local Internet connection before updating through the Internet.
  • Page 85 To update the BIOS by Internet: Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select ASUS EZ Flash Utility and press <Enter>. Select via Internet. Press the Left/Right arrow keys to select an Internet connection method, and then press <Enter>.

  • Page 86: Asus Crashfree Bios 3

    The BIOS file in the motherboard support DVD may be older than the BIOS file published on the ASUS official website. If you want to use the newer BIOS file, download the file at https://www.asus.com/support/ and save it to a USB flash drive.

  • Page 87: Chapter 4: Raid Support

    With the RAID 10 configuration you get all the benefits of both RAID 0 and RAID 1 configurations. Use four new hard disk drives or use an existing drive and three new drives for this setup. ASUS WS C422 SAGE/10G...

  • Page 88: Installing Storage Devices

    4.1.2 Installing storage devices The motherboard supports Serial ATA hard disk drives and PCIE SSD storage devices. For optimal performance, install identical drives of the same model and capacity when creating a disk array. Refer to Chapter 2 for details on installing storage devices to your motherboard. 4.1.3 Intel Rapid Storage Technology in UEFI BIOS...
  • Page 89 When the RAID Level item is selected, press <Enter> to select the RAID level to create, and then press <Enter>. Under Select Disks, press <Enter> and select X for the disks you want to include in the RAID set. ASUS WS C422 SAGE/10G...
  • Page 90 When the Strip Size item is selected, press <Enter> to select strip size for the RAID array (for RAID 0, 10 and 5 only), and then press <Enter>. The available strip size values range from 4 KB to 128 KB. The following are typical values: RAID 0: 128 KB RAID 10: 64 KB RAID 5: 64 KB...
  • Page 91 <Enter>. The following screen appears: When the Delete item is selected, press <Enter>, then select Yes to delete the RAID volume and return to the Intel Rapid Storage Technology menu, or select No to ® cancel. ASUS WS C422 SAGE/10G...

  • Page 92: Intel ® Virtual Raid On Cpu In Uefi Bios

    4.1.4 Intel Virtual Raid on CPU in UEFI BIOS ® This feature requires a KEY module to enable CPU RAID functions with Intel CPU RSTe. ® • The KEY module is purchased separately. • Refer to section 1.1.9 Internal connectors for the location of the VROC_HW_KEY connector.
  • Page 93 Go to the Advanced menu > Intel(R) Virtual Raid on CPU > All Intel VMD Controllers, then press <Enter> to display the Intel Virtual Raid on CPU menu. ® Refer to Chapter 3 for details on entering and navigating through the BIOS Setup. ASUS WS C422 SAGE/10G...
  • Page 94 Creating a RAID set To create a RAID set: From the Intel Virtual Raid on CPU menu, select Create RAID Volume and press ® <Enter>. The following screen appears: When the Name item is selected, enter a name for the RAID set and press <Enter>. When the RAID Level item is selected, press <Enter>...
  • Page 95 <Enter>. The default value indicates the maximum allowed capacity. When the Create Volume item is selected, press <Enter> to create the RAID volume and return to the Intel Rapid Storage Technology menu. ® ASUS WS C422 SAGE/10G...
  • Page 96 Deleting a RAID set Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: From the Intel Virtual Raid on CPU menu, select the RAID volume you want to delete ®...
  • Page 97 Boot the computer using the Windows 10 OS installation disc. Follow the screen ® instructions to start installing Windows ® When prompted to choose a type of installation, click Custom: Install Windows only (advanced). Click Load Driver. ASUS WS C422 SAGE/10G 4-11...
  • Page 98 A message appears, reminding you to insert the installation media containing the driver of the RAID controller driver. If you have only one optical drive installed in your system, eject the Windows OS installation disc and replace with the motherboard Support DVD into the optical drive.

  • Page 99: Intel ® Rapid Storage Technology Option Rom Utility

    The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen. The utility supports maximum four hard disk drives for RAID configuration. ASUS WS C422 SAGE/10G 4-13...
  • Page 100 Creating a RAID set To create a RAID set: From the utility main menu, select 1. Create RAID Volume and press <Enter>. The following screen appears: Name: Volume 0 RAID Level: aaaaaaaaaaaaaaa Disks: dssdsdsds Strip Size:aaaaaaaaaaaaaaaa Capacity:aaaaaaaaaaaaaa Sync:aaaaaaaaaa Create volume [HELP] Enter a unique volume name that has no special characters and is 16 characters or less.
  • Page 101 ALL DATA ON SELECTED DISKS WILL BE LOST. Are you sure you want to create this volume? (Y/N) Press <Y> to create the RAID volume and return to the main menu, or <N> to go back to the CREATE VOLUME menu. ASUS WS C422 SAGE/10G 4-15...
  • Page 102 Deleting a RAID set Be cautious when deleting a RAID set. You will lose all data on the hard disk drives when you delete a RAID set. To delete a RAID set: From the utility main menu, select 2. Delete RAID Volume and press <Enter>. The following screen appears: [DELETE VOLUME MENU] Name...

  • Page 103: Creating A Raid Driver Disk

    RAID driver from the support DVD to the USB flash drive. To set up a Windows UEFI operating system under RAID mode, ensure to load the UEFI ® driver for your optical drive. ASUS WS C422 SAGE/10G 4-17...
  • Page 104 4-18 Chapter 4: RAID Support...

  • Page 105: Chapter 5: Multi Gpu Support

    AMD CrossFireX™ graphics cards to your system. To uninstall existing graphics card drivers: Close all current applications. Go to Control Panel > Programs and Features. Select your current graphics card driver/s. Select Uninstall. Turn off your computer. ASUS WS C422 SAGE/10G...

  • Page 106: Installing Two Crossfirex™ Graphics Cards

    5.1.3 Installing two CrossFireX™ graphics cards The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same. To install two CrossFireX™ graphics cards: Prepare two CrossFireX™-ready graphics cards.

  • Page 107: Installing Three Crossfirex™ Graphics Cards

    Ensure that the cards are properly seated on the slots. Align and firmly insert the two CrossFireX™ bridge connectors to the goldfingers on each graphics card. Ensure that the connectors are firmly in place. Connect three independent auxiliary power sources from the power supply to the three graphics cards separately. Connect a VGA or a DVI cable to the graphics card. ASUS WS C422 SAGE/10G...

  • Page 108: Installing Four Crossfirex™ Graphics Cards

    5.1.5 Installing four CrossFireX™ graphics cards To install four CrossFireX™ graphics cards: Prepare four CrossFireX™-ready graphics cards. Insert the four graphics cards into the PCIEX16 slots. Refer to Chapter 1 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation.

  • Page 109: Installing The Device Drivers

    Enabling the AMD CrossFireX™ technology After installing your graphics cards and the device drivers, enable the CrossFireX™ feature through the AMD Vision Engine Control Center in Windows environment. Launching the AMD VISION Engine Control Center To launch the AMD VISION Engine Control Center: Right-click on the Windows desktop and select AMD ® VISION Engine Control Center. ASUS WS C422 SAGE/10G...
  • Page 110 Enabling Dual CrossFireX™ technology To enable Dual CrossFireX™ technology: In the AMD Vision Engine Control Center window, click Performance > AMD CrossFireX™. Select Enable CrossFireX™. Select a GPU combination from the drop-down list. Click Apply to save and activate the GPU settings made. Chapter 5: Multiple GPU Support...

  • Page 111: Nvidia Sli Technology

    Insert the two graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 1 in this user manual for the locations of the PCIEX16 slots recommended for multi- graphics card installation. Ensure that the cards are properly seated on the slots. ASUS WS C422 SAGE/10G...

  • Page 112: Installing Three Sli-Ready Graphics Cards

    Align and firmly insert the SLI bridge connector to the goldfingers on each graphics ® card. Ensure that the connector is firmly in place. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately. Connect a VGA or a DVI cable to the graphics card. ® bridge Goldfingers 5.2.3 Installing three SLI-ready graphics cards Refer to the documentation that came with your graphics card package to install the device drivers.

  • Page 113: Installing Four Sli-Ready Graphics Cards

    PCIEX16 slots recommended for multi-graphics card installation. Ensure that the cards are properly seated on the slots. Align and firmly insert the 4-way SLI bridge connector to the goldfingers on each ® graphics card. Ensure that the connector is firmly in place. Connect four independent auxiliary power sources from the power supply to the four graphics cards separately. Connect a VGA or a DVI cable to the graphics card. 4-way SLI bridge ® ASUS WS C422 SAGE/10G...

  • Page 114: Installing The Device Drivers

    5.2.5 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the NVIDIA technology. ® ® Download the latest driver from the NVIDIA website at www.NVIDIA.com. ® 5.2.6 Enabling the NVIDIA technology ® ® After installing your graphics cards and the device drivers, enable the SLI feature in NVIDIA ®...
  • Page 115 ® From the NVIDIA Control Panel window, ® select Configure SLI, Surround, PhysX. In the Quad-SLI enabled, click Maximize 3D Performance SLI to set the display for viewing SLI rendered content. When ® done, click Apply. ASUS WS C422 SAGE/10G 5-11...
  • Page 116 5-12 Chapter 5: Multiple GPU Support...

  • Page 117: Appendix

    Appendix WS C422 SAGE/10G block diagram (48-Lane) ASUS WS C422 SAGE/10G...

  • Page 118: Q-Code Table

    Q-Code table Code Description Not used microcode CACHE_ENABLED PCH initialization CPU_EARLY_INIT PEI Core is started Pre-memory CPU initialization is started 11 – 14 Pre-memory System Agent initialization is started 15 – 18 Pre-memory PCH initialization is started 19 – 1C Memory initialization 2B –...
  • Page 119 IDE Detect IDE Enable SCSI initialization is started SCSI Reset SCSI Detect SCSI Enable Setup Verifying Password Start of Setup Reserved for ASL (see ASL Status Codes section below) Setup Input Wait (continued on the next page) ASUS WS C422 SAGE/10G...
  • Page 120 Code Description Reserved for ASL (see ASL Status Codes section below) Ready To Boot event Legacy Boot event Exit Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy Option ROM Initialization System Reset USB hot plug PCI bus hot plug Clean-up of NVRAM...

  • Page 121: Notices

    Notices FCC Compliance Information Responsible Party: Asus Computer International Address: 48720 Kato Rd., Fremont, CA 94538, USA Phone / Fax No: (510)739-3777 / (510)608-4555 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 122 Compliance Statement of Innovation, Science and Economic Development Canada (ISED) This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
  • Page 123 ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements.
  • Page 124 ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials.
  • Page 125 överensstämmelse finns på: www.asus.com/support Cijeli tekst EU izjave o sukladnosti dostupan je na: www.asus.com/support Українська ASUSTeK Computer Inc. заявляє, що цей пристрій відповідає Čeština Společnost ASUSTeK Computer Inc. tímto prohlašuje, že toto основним...

  • Page 126: Asus Contact Information

    +1-510-608-4555 Web site https://www.asus.com/us/ Technical Support Support fax +1-812-284-0883 Telephone +1-812-282-2787 Online support https://www.asus.com/support/Product/ContactUs/ Services/questionform/?lang=en-us ASUS COMPUTER GmbH (Germany and Austria) Address Harkort Str. 21-23, 40880 Ratingen, Germany +49-2102-959931 Web site https://www.asus.com/de/ Technical Support Telephone +49-2102-5789555 Support Fax +49-2102-959911 Online support https://www.asus.com/support/Product/ContactUs/...

Table of Contents